Bedienungsanleitung Tascam DP-03SD (Seite 39 von 76) (Englisch)

617896

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

TASCAM DP-03SD 39

7 – Recorder Functions

Bouncing tracks

Use this unit’s bounce function to mix already recorded tracks

(1–8) down to one or two tracks.

Multitrack tape recorders can only bounce to an open track (in

other words, they can not record to a track that is also a source

of the mix). For example, tracks 1–7 could be bounced to track

8, but tracks 1–8 could not be bounced to track 1. This unit,

however, does not have this limitation. You can bounce tracks

1–8 to mix down to tracks 1 and 2 (stereo bounce), or bounce

tracks 1–8 as a mono mix to track 1 (mono bounce).

NOTE

Inside this unit, a mixdown is made to create a mix master

that is recorded to the designated tracks.

TRACK 1

Drum L

TRACK 2

Drum R

TRACK 3

Perc. L

TRACK 4

Perc. R

TRACK 5

Bass

TRACK 6

Piano L

TRACK 7

Piano R

TRACK 8

TRACK 3

Perc. L

(Over-

writing

possible)

TRACK 4

Perc. R

(Over-

writing

possible)

TRACK 8

(Over-

writing

possible)

TRACK 7

Piano R

(Over-

writing

possible)

TRACK 5

Bass

(Over-

writing

possible)

TRACK 6

Piano L

(Over-

writing

possible)

TRACK 1 & 2

Rhythm, Bass,

Piano, SE

TRACK 1 & 2

Rhythm, Bass,

Piano, SE

TRACK 3

Guitar L

TRACK 4

Guitar R

TRACK 5

Lead

Guitar

TRACK 6

Lead

Vocal

TRACK 7

Chorus L

TRACK 8

Chorus R

New recording possible on tracks 3-8

Bounce tracks 1-8 to mix down to tracks 1-2

Source tracks are erased when they are bounce destinations.

(In the illustration above the drum parts are overwritten

by the stereo mix). However, you can use the unit’s (undo)

function to return to the previous state if you make a

mistake (see “Undoing the last operation (single undo)” on

page 36).

Using the bounce function

1 In multitrack mode, press the BOUNCE button.

After the

Bounce !

pop-up message appears, the unit

switches to BOUNCE mode and the Home Screen reopens.

2 Press the REC buttons for the bounce destination tracks (the

indicators blink).

For a stereo bounce, press the REC buttons for any two

tracks. For a mono bounce (bouncing the mix to a single

track) press the REC button for any one track.

3 Adjust the track faders and PAN knobs for the bounce source

tracks.

When making a stereo bounce, the lower numbered track is

the left (L) side.

For a mono bounce, turn the PAN knobs of the bounce

source tracks all the way to L.

Use the MASTER fader to adjust the overall level.

4 After returning to the start of the song, press the PLAY (Á)

button while pressing and holding the RECORD (–) button

to start the bounce.

Confirming the result

Mute the bounce source tracks (see “Muting tracks” on page

49), and play the song from the beginning.

If you are not satisfied with the result because, for example, the

balance between instruments is poor, or the pan settings are

wrong, use the undo function (see “Undoing the last operation

(single undo)” on page 36).

If you are satisfied with the result, press the BOUNCE button to

return to the

MULTI TRACK

mode.

After bouncing tracks, you can make new recordings over the

other tracks.

TIP

If it is possible that you might need the original tracks at

some later time, back-up the track data to a computer or

copy the song before bouncing (see “Backing-up songs”

on page 61 and “Connecting with a computer” on page

60).

Locate and search functions

Direct locate function

The current recorder position is shown at the top of the

display as “hours: minutes: seconds: frames” (there are 30

frames per second). You can move the current recorder

position to a specific time by inputting it here.

1 On the Home Screen, use the HOME button to move the

cursor (underline) between time divisions. You can edit the

value at the cursor positions.

The seconds are selected in the following figure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-03SD Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info