Bedienungsanleitung Tascam DP-32 (Seite 49 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

TASCAM DP-32 49

7 - Recorder Functions

Punching in and out

Punching in/out is a technique used to replace a part of

an already recorded track.

Start playback and when you reach the part that you want

to replace, switch to record (punch in), then switch back

to playback (or stop) when you finish replacing the part

that you want (punch out).

1. Decide what part of the track you plan to re-record.

Choose a point to begin where the new recording can

sit well with the existing recording.

2. Press the REC buttons of the tracks that you want

to partially re-record to put them into recording

standby (REC buttons start flashing).

3. Start playback before the part you want to replace.

4. When the part you want to replace is reached,

press the RECORD (0) button and start your

performance.

Recording starts (punch in).

5. When you finish the replacement recording, press

the PLAY (7) button.

Playback resumes (punch out).

TIP

You can also press the STOP (8 ) button to punch out at the

end of the replacement recording.

Using a footswitch to punch in/out

You can connect a TASCAM RC-3F footswitch (sold

separately) to the REMOTE jack on the front panel and

use it to punch in and out.

In step 4 above, step on the footswitch instead of

pressing the RECORD (0) button, and in step 5, step on

the footswitch again instead of pressing the PLAY (7)

button.

TASCAM RC-3F footswitch

(sold separately)

NOTE

Step on the switch (pedal) that you have set to

PUNCH IN/

OUT

in the footswitch settings. By default, the center pedal

is set to

PUNCH IN/OUT

. (See "Setting the footswitch"

below.)

Setting the footswitch

Set the footswitch on the

PREFERENCE

screen.

1. When the recorder is stopped, press the MENU

button to open the

screen.

2. Use the JOG/DATA dial or the CURSOR (5/b/g/t)

buttons to select (highlight green)

PREFERENCE

and then press the F4 (t) button.

The

PREFERENCE

screen opens.

3. Use the CURSOR (5/b) buttons to select (highlight

blue)

Foot SW Right

4. Use the JOG/DATA dial to select the function

that you want to assign to the right pedal of the

TASCAM RC-3F footswitch.

Options:

PLAY

REC

STOP

REW

PUNCH IN/OUT

PLAY/STOP

(right pedal

default),

CUE LOCATE

5. In the same way, set

Foot SW Center

for the

function of the center pedal and

Foot SW Left

for the left pedal.

Options:

PLAY

REC

STOP

REW

PUNCH IN/OUT

(center pedal default),

PLAY/

STOP

CUE LOCATE

(left pedal default)

6. After making the settings, press the HOME button

to return to the Home screen.

Footswitch function list

Function Description

PLAY

Same as unit's

PLAY (7) button

REC

Same as unit's

RECORD (0) button

STOP

Same as unit's

STOP (8) button

Same as unit's

F FWD (,) (TO LAST REC)

button

REW

Same as unit's

REW (m) (TO ZERO) button

PUNCH IN/

OUT

Punches in when pressed during playback,

punches out when pressed during recording.

PLAY/STOP

Starts playback when stopped, stops in other

states.

CUE LOCATE Locates last point where playback started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info