Bedienungsanleitung Tascam DP-32 (Seite 51 von 104) (Englisch)

617894

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

TASCAM DP-32 51

7 - Recorder Functions

(measure-beat) at the top of the Home screen. The tempo

is also displayed.

The

ABS

display is based on the absolute time. In

ABS

mode, you can locate a position in frame units. The

current position of the recorder is shown as a time (hours:

minutes: seconds: frames) at the top of the Home screen

(30 frames per second).

You can specify a time in this time display area and move

the transport to that point.

Locating a specified time directly

ABS

mode, you can locate a specified time directly

using the following procedure. Direct location this way is

not possible when recording.

1. Press the HOME button to open the Home screen.

ABS

appears to the left of the counter on the Home

screen.

ABS

does not appear, press the METRONOME

button to open the

METRONOME

screen.

Use the CURSOR (5/b) buttons to select the

BAR DISP

item, and then use the JOG/DATA dial

to set it to

OFF

. This will cause

ABS

to appear on the

Home screen.

3. Turn the JOG/DATA dial to change the time (the

speed that the time changes corresponds to the

speed that the dial is turned).

4. After setting the desired time value, press the PLAY

(7) button to start playback from that time.

Locating a specified bar/beat directly

In BAR mode, in the same way that you can locate a

specified time directly in ABS mode, you can locate a

position by specifying a time in bars and beats using

the following procedure. Direct location this way is not

possible when recording.

1. Press the HOME button to open the Home screen.

BAR

appears to the left of the counter of the Home

screen.

BAR

does not appear, press the METRONOME

button to open the

METRONOME

screen..

Use the CURSOR (5/b) buttons to select the

BAR DISP

item, and then use the JOG/DATA dial

to set it to

. This will cause

BAR

to appear on the

Home screen.

3. The value cycles automatically when they reach the

highest or lowest value in a field.

When set to 4/4, if the beat field exceeds

, for

example, the bar value will increase by one, and the

beat field will return to

In the same way, when you turn the JOG/DATA dial

to lower a value and the beat value passes through

01, the bar value will decrease and the total value will

change in succession. When set to 4/4, for example, if

the value drops below

when the cursor is located

under the beat field, the bar value will decrease by

one, and the beat field will return to

4. After setting the desired measure/beat, press the

PLAY (7) button to start playback from that beat.

Location marks

This unit allows you to set up to 99 location marks in each

song. For example, you could mark the intro, vocal entry

points and the starts of verses.

Setting a location mark

When stopped, recording or playing back, press the

MARK SET button at a point where you want a location

mark.

A mark number (

MARK xx

) appears on the Home screen

(

is the mark number).

The displayed mark number is the mark at the current

position or the mark that is placed closes before the

current position. A flag icon is also shown above the

timeline.

NOTE

The marks are numbered in the order that you enter them.

They are not numbered according to their positions in the

song. Therefore,

MARK 05

could appear before

MARK 01

in a song, for example.

Skipping to location marks

Press the F FWD (,) or REW (m) button to skip to

the next or previous mark.

NOTE

Marks are skipped to in time order, not in numerical order.

Deleting a location mark

You can delete marks when the recorder is stopped.

1. Press the F FWD (,) or REW (m) button to move

to the mark that you want to delete.

2. Press the MARK SET button to delete the location

mark.

NOTE

This operation cannot be undone. Make sure you want to

execute it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-32 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info