Bedienungsanleitung Tascam HS-8 (Seite 33 von 72) (Englisch)

617905

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

TASCAM HS-8 33

This unit manages audio files in projects. A CF card

contains project folders, and each project folder contains

subfolders that hold audio files, which are called takes..

Project: Contains all the materials for one program or

work

Folder: Includes all the materials for a project

Take: An audio file of a recording

CAUTION

The sampling frequency and time code frame-type in a project are

xed.

File formats

This unit can record and play files in the following types of

formats.

File format: BWF

•

Sampling frequencies: 44.1/48/47.952/48.048/88.

•

2/96/176.4/192 kHz (47.952/48.048: 48 kHz ±0.1%

pull-down/pull-up)

Bit length: 16 or 24

•

Number of tracks:

•

1–8 tracks (at 44.1, 48, 88.2 or 96 kHz)

1–8 tracks + stereo mix (at 44.1 or 48 kHz)

1–4 tracks (at 176.4 or 192 kHz)

File mode: monophonic or polyphonic

•

Monophonic and polyphonic modes

In monophonic mode, each track is recorded as an

independent monaural BWF file.

In polyphonic mode, multiple tracks are recorded

together as a single BWF file.

When transferring a file to an audio application that is

compatible with polyphonic files, multiple tracks can be

input at once.

The 2mix file is always recorded as a polyphonic (stereo)

file.

Folder where files are saved in mono mode

In mono mode, files can be saved in one of two places

(folders).

SubFolder mode

•

Subfolders are created for each take inside project

folders, and recorded audio files are saved in them.

Folder mode

•

Recorded audio files are saved directly inside the

project folder.

NOTE

When Folder mode is selected, the number of les created is

•

large. For this reason, the number of tracks that can be recorded

is greatly reduced. (See “Recording operation limitations” on

page 29.)

During recording, you can press the REC key to start recording a

•

new take. This function can be used 4 seconds after beginning

recording in Poly and Subfolder modes, but in Folder mode, you

might have to wait more than 4 seconds.

The default setting is “SubFolder”.

•

PROJECT screen overview

Press the PROJECT key on the front panel to open the

PROJECT

screen. The last used

PROJECT

screen page

(project selection, folder selection or take selection)

opens.

Project selection screen

Directory display: The current directory level and

number of projects is shown. (In the example above,

the root directory of CF card 1 contains 12 projects.)

NUM OF FOLDER: This shows the number of folders in

each project.

Fs: This shows the sampling frequency of the project. The

values are abbreviated as follows.

44.1 kHz:

44k

48 kHz:

48k

48 kHz –0.1% (pull-down):

48k-

48 kHz +0.1% (pull- up):

48k+

88.2 kHz:

88k

96 kHz:

96k

176.4 kHz:

176k

192 kHz:

192k

ENTER: Press a project “ ®” button to show the contents

of that project.

5 – Projects

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam HS-8 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info