Bedienungsanleitung TC Helicon VoiceLive Rack (Seite 26 von 89) (Englisch)

658357

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

Overview

Much of the operation of VoiceLive Rack is

covered in the Quick Start and Basic Operation

chapters. This Detailed Operation chapter offers

additional procedural detail where it’s needed.

For button menus and parameter descriptions

see the Setup, Edit etc. menu chapters.

Harmony and Hardtune Guided

by a Guitar

TC-Helicon’s NaturalPlay algorithm can listen to

chords played on an electric guitar or electried

acoustic guitar to guide the Harmony and the

Hardtune effects. Both need to stay “in key” or

musically relevant to accompanying instruments.

f Acoustic guitar

If you haven’t by now, connect a cable from your

pickup-equipped acoustic guitar to the GUITAR

IN as described in the Quick Start. You should

now hear your guitar sound mixed with your

voice.

To adjust the balance of guitar and voice, ensure

the HOME button is lit then turn the third Mix/

Edit knob. This will present the MIX screen so you

can adjust the level of your guitar.

Now, sing while you sample the harmony- and

Hardtune-based presets with effects closely

related to your guitar playing. You should now

hear nicely produced lead vocal, harmony and/or

Hardtuned vocals and guitar from your PA system

or headphones.

The recommended pickup is the typical under-

saddle type because potential mistracking can re-

sult from resonances generated by soundboard-

mounted pickups.

f Electric guitar

Connect a cable from your electric guitar to the

GUITAR IN. Connect another cable from the

GUITAR THRU to your rst guitar effects pedal

or to your amp. Set your guitar amp volume to a

level compatible with your vocals.

By connecting a jack to the GUITAR THRU, the

guitar signal is removed from the internal mixer

and effects paths in VoiceLive Rack.

If you hear a buzz from either your guitar ampli-

er or the PA VoiceLive Rack is connected to, press

the GND LIFT (ground lift) button to silence it.

Now you can sample the harmony- and Hard-

tune-based presets with the effects musically

related to your guitar playing.

f Guitar performance tips

To ensure that the harmony voices follow your

guitar closely, it’s best to play cleanly with chords

containing at least two notes. If you want to

sing right at the start of a song, it’s important to

briey play a chord rst. A recognized chord will

show “NP” in the LCD display.

Your guitar should be well-tuned. TC Electronic’s

PolyTune is perfect for this.

If the song section you want vocal harmony or

Hardtune effects on has fast chord changes, single

note runs or very slow arpeggios, it may be bet-

ter to use presets based on a xed Key. To nd

out more about this see Harmony and Hardtune

guided by a xed key.

Harmony and Hardtune Guided

by a MIDI Keyboard

Using MIDI opens up a range of harmony options.

This section will discuss the basics of setting MIDI

channel and performing with a MIDI keyboard/

synth to control Harmony and Hardtune.

Detailed Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TC Helicon VoiceLive Rack Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TC Helicon VoiceLive Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info