Bedienungsanleitung TC Helicon VoiceLive Rack (Seite 28 von 89) (Englisch)

658357

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

Detailed Operation

b) Set the GLOBAL NATURALPLAY parameter

in the SYSTEM tab of the Setup menu to

SCALE. This will disable the auto input sensing

feature of NaturalPlay.

To set key using the Switch3 footswitch:

You can connect the optional Switch3 footswitch

for direct access to Key setting during perfor-

mance.

1. Connect the Switch3 to the PEDAL input.

2. Set any of the footswitches to SET KEY in the

SWITCH3 tab of the Setup menu.

3. Load a harmony preset to sing through.

4. Tap the footswitch you assigned to Set Key in

step 2.

5. Note the prompt in VoiceLive Rack’s display

and use the footswitches to input your key.

The previous assignment of the 3 footswitches

will temporarily be replaced by the key setting

functions.

6. The key will become active immediately unless

you press the Cancel footswitch.

If you have a guitar connected, this makes key set-

ting with Switch3 even easier. Simply play a major

or minor chord that you want to use as the key

then tap the Set Key button on the footswitch.

The chord you play will be recognized automati-

cally.

Note that the Key you set is global so you can

try other presets with your song without enter-

ing Key again. To congure presets so they can

save different keys and scales, set the GLOBAL

KEY/SCALE parameter in the SYSTEM tab of the

Setup menu to OFF.

If you’re lucky the rst time, you’ll be rewarded

with musically appropriate Harmony and/or

Hardtune effects musically following your whole

chorus or song. If not, you can try the following:

tune-type processing products.

Briey, all of the chords in an entire song and your

melody can belong to a single major or minor

“Key”. When the match of Key and song is cor-

rect, xed key is harmony is nearly indistinguish-

able from recorded harmony. There are limita-

tions however:

• Fixed Key harmony works for many, but not all

songs.

• Fixed Key works best with 3rd harmony inter-

vals; adding the 5th (interval: Higher) reduces

the number of compatible songs.

• The terms “Key” and “Key and scale” can be

used interchangeably.

You should be singing with musical backing and

stay true to a A=440Hz reference. This could be

a CD or other musicians. Choose a simple song

to start with. Determine the Key of your song;

this is often the rst or last chord in a song with-

out extensions. For example G Major is a valid

Key, Gm7b5 is not.

To set key from the front panel:

Both harmony and Hardtune use the same key

and this is set in the HARMONY edit tab.

1. Load a preset with Harmony active. A good

one to start with is #3 CLOSE UP 3RD.

2. Hold the Harmony button.

3. Set the KEY and SCALE parameters on the

top line* to the key of your song.

* If these parameters are not visible, the Natu-

ralPlay algorithm in VoiceLive Rack has recognized

input from either the AUX IN, GUITAR IN or

MIDI inputs and has congured itself to derive

guidance from that input.

In this case you can:

a) Cycle the power off and on and ensure no

connections are made to the inputs noted

above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TC Helicon VoiceLive Rack Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TC Helicon VoiceLive Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info