Bedienungsanleitung TC Helicon VoiceLive Rack (Seite 44 von 89) (Englisch)

658357

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

GUITAR Tab Overview

This tab offers control of a suite of processing

effects for the guitar input. These effects are only

applicable when the guitar is mixed through the

signal path of VoiceLive Rack and not externally

via the GUITAR THRU jack and on to an ampli-

er. Thus; ensure that no jack is inserted into the

GUITAR THRU jack when you want to hear and

adjust these parameters.

Master on/off control for all effects in this tab.

PHASE

Phase reverse can help to minimize low and

low-mid frequency feedback on acoustic guitars

with loud monitoring. The effectiveness of phase

reversal depends on your guitar’s physical location

in relation to the monitor. If you move around the

stage, reversal may not help, but if you typically

remain in the same position it can help consider-

ably.

To see if phase reversal will help, stand where

you will perform in relation to your monitor and

carefully turn up the level of your guitar with your

guitar’s onboard volume control until it starts to

feed back. Note the volume if the control has an

indication then turn down the volume and adjust

the phase reverse control in VoiceLive Rack.

Return to standing position and adjust your guitar

volume to the level that caused the feedback. If

this didn’t work, guitar monitor level or overall

(guitar and vocal effects) will have to be reduced.

f REVERB STYLE

The Reverb processor accurately simulates acous-

tic spaces around your guitar. This is an entirely

separate processor from the one used for the

vocal processing. It does, however, offer the same

style selection but with no Style editing.

There are 30 styles to choose from covering ev-

erything from tight ambience to giant arenas. The

factory default style is called SMOOTH PLATE.

f REVERB LEVEL

Turn the Mix/Edit knob below this parameter to

raise and lower the amount of Reverb on your

guitar from the factory default of -30 dB.

f UMOD STYLE

Scroll down to this row and use the Mix/Edit

knob to change µMod (Micromod) style for the

guitar. As with Reverb, this effect processor is

entirely separate from the vocal µMod processor

while offering the same style selection. No µMod

style editing is possible for guitar.

The factory default style, MICROMOD CLONE

offers a gentle stereo detune effect.

f UMOD LEVEL

Turn the Mix/Edit knob below this parameter to

raise or lower the amount of µMod effect on

your guitar. The factory default mix level is -12 dB.

Use the Navigate arrows to tab over to the EQ

tab from the GUITAR tab. Here you will nd a 3

band EQ featuring:

• Low band shelving

• All band fully parametric peak/dip control

• High band shelving

The two “Shelving” EQs boost or cut all frequen-

cies below or above the frequencies set by the

EQ LOW FREQ and EQ HIGH FREQ controls

respectively. These are most like the common

Bass and Treble controls on a stereo system.

The “Parametric” EQ boosts or cuts the frequen-

cies within a selected band that is dened by a

center frequency (EQ PARA FREQ) and a width

control (EQ PARA WIDTH). Usually, the gain of

a narrow parametric band is typically reduced to

The Setup Button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TC Helicon VoiceLive Rack Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TC Helicon VoiceLive Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info