Bedienungsanleitung TCL TTW Window AC (Seite 12 von 58) (Englisch, Französisch, Spanisch)

794149

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

How to Control Your AC

All the basics you need to know to stay cool!

1. Digital Display: When the timer is not

in use, the operation mode and the set

temperature should be displayed. Time

should be displayed under the timer setting.

2. and Buttons – use these buttons

on the control panel or remote control

to increase or decrease the desired

temperature, or time using the Timer. The

temperature range is:

61°-88° Fahrenheit, or 16°-31° Celsius

3. Power Button: Turn the air conditioner on

and o.

4. Modes – Press the Mode button on the

control panel to cycle and select a Mode,

or select a Mode by pressing the desired

button the remote.

• Cool Mode - The cooling function allows the

air conditioner to cool the room and reduce

air humidity at the same time. Adjust the

fan speed and temperature to your desired

comfort level. In this mode, if Eco is not enabled, the fan may continue to run after reaching

the desired temperature.

• Dry Mode – This function reduces the humidity of the air to make the room more comfortable.

Press the Mode button to set to Dry mode - an automatic function of alternating cooling

cycles and air fan is activated.

This design feature helps remove moisture and increase eciency.

You may hear the thermostat click when the compressor cycles on and o. Water should

collect in the base pan on rainy days, or high humidity days. The water may overﬂow and drip

from the unit on the outside. The fan may run, even when the compressor is not on.

• Fan Mode: Fan Mode helps to circulate air in your home, but only works when the air

conditioner is vented

• Auto Mode: In Auto mode the unit automatically chooses the fan speed and the mode of

operation (Cool, Dry or Fan).In this mode the temperature is set automatically according

to the room temperature (tested by the temperature sensor which is incorporated in the

indoor unit.).

• Heat Mode: The heating function allows the air conditioner to heat the room. Press the Mode

button to activate the heating function. To optimize the function of the air conditioner, adjust

the temperature and the speed by pressing the button indicated. Modules with heater only.

5. Timer Button – press the Timer button on the panel or the Timer button on the remote to set

the timer.

• Set Timer On: With the AC o, press the Timer button and then use the

and buttons to set the desired temperature. Press the Timer button again and

use the and buttons to set the desired amount of time before the AC turns on.

Press the timer button again to start the countdown.

• Set Timer O: With the AC on, press the Timer button and then use the and

buttons to set the length of time before the AC turns o. Press the timer button again

to start the countdown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL TTW Window AC Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info