Bedienungsanleitung TCL TTW Window AC (Seite 13 von 58) (Englisch, Französisch, Spanisch)

794149

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Note: It can be set to automatically turn o or on in 0.5-24 hours. Each press of the

buttons should increase or decrease the timer. The Timer can be set in 0.5 hours increment below 10

hours and 1 hour increment for 10 hours or above. The Set light should turn on while setting.

To cancel the Set function, press the TIMER button again.

6. Eco Mode – In Eco mode, the unit is designed to turn o once the room is cooled to the user-

set temperature. The unit should turn back on when the room temperature rises above the

user-set temperature. While in Eco mode, the fan is designed to occasionally turn on for a few

seconds in order to take an accurate temperature reading.

The unit should turn back on when the room temperature rises above the user set temperature.

Before the compressor starts, the fan motor is designed to run for a while, then it should stop for a

while. The process should continue to repeat to save energy while creating a

comfortable environment.

7. Sleep Button – In Sleep mode, all of the display lights should turn o after a while, but the

Sleep light stays on. In Sleep mode, the air conditioner is designed to automatically adjust

the temperature and fan speed to make the room more comfortable during the night. The set

temperature should automatically raise every 30-60 minutes, and at most change six times until

the set temperature is 81 or 82 degrees.

8. Fan Speed – Press the Fan Speed button to choose the fan speed options. You can choose Hi,

Med, Lo or auto speed in cool mode and choose Hi, Med, Lo in fan mode.

9. Filter Button – After the fan motor has run for 500 total hours, the Filter Check light should

turn on to remind the user to clean the ﬁlter. After you clean the ﬁlter, you can turn o the light

by pressing the Filter button.

10. Directional Louvers: To direct the airﬂow horizontal wheel to control the horizontal direction,

air deﬂector to control the vertical direction.

Operating Your Air Conditioner

Remote Control

1. POWER: Turn the air conditioner on and o.

2. COOL: Press the COOL button to start COOL mode.

3. Up and Down: Use these buttons to increase or decrease the

temperature. The Set light should turn on after selecting the

desired temperature. Decrease the Set Temperature or Timer.

Temperature range: 61 ~88 Fahrenheit or 16 ~31 Celsius.

4. SLEEP: Press the Sleep button, all of the display lights should

turn o after a while, but the sleep light is always on. In this

mode, the air conditioner is designed to automatically adjust the

temperature and fan speed to make the room more comfortable

during the night. The set temperature should automatically

change every 30-60 minutes and at most change six times until

the set temperature is 81 or 82 Fahrenheit for cooling and 75

or 76 Fahrenheit

for heating.

5. TIMER: Use these buttons on the control panel and remote to set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TCL TTW Window AC Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info