Bedienungsanleitung Team CMM 5 (Seite 11 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

486906

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

11 TEAM CMM 5 - 101214

Assembly page 11/52

Fax +32 2 359 95 50

USING THE STICK MIXER (motor unit and metal leg)

 Ensure that the unit is unplugged.

 Screw the shaft onto the screw thread at the bottom of the motor unit. You should place

the symbol ▼ on the motor unit in front of the opened padlock  on the shaft and then

screw it to the motor unit, so that the closed padlock  ends up in front of the symbol ▼.

Using gentle hand pressure only ensures that the shaft is fully tightened onto the motor

unit.

 Put the ingredients into the bowl or a suitable container (such as a mixing bowl or pan).

Do not overfill to prevent splashing.

 Plug the unit into a suitable mains socket.

 Hold the unit securely and press the on/off button. We recommend that the motor unit is

operated in short on/off pulses.

 When mixing liquids ensure the blade is fully immersed before switching on the appliance

to prevent splashing.

 Never remove the unit from the liquid until the blade has totally stopped spinning.

USING THE CHOPPER (motor unit, chopper and bowl)

 Ensure that the unit is unplugged.

 First place the blade in the bowl.

 Add ingredients to the bowl. Some hard foodstuffs (e.g. carrots, cheese and meat) will

need to be chopped before being put into the bowl. DO NOT OVERFILL THE BOWL.

 Insert the opening of the lid in the bottom of the motor unit. You should place the symbol

▼ on the motor unit in front of the opened padlock  on the lid and then screw the lid to

the motor unit, so that the closed padlock  ends up in front of the symbol ▼. Then pull

lightly on the lid to ensure that it is fully tightened onto the motor unit.

 Place the lid on the container respecting the positioning of its openings-out. If necessary,

turn the lid until it is correctly placed on the container, then make it turn very lightly. Check

the locking of the lid by pulling on it lightly.

 Plug the unit into a suitable mains socket.

 Hold the bowl securely with one hand, and the motor unit with your other hand.

 Press the on/off button.

 NEVER remove the motor unit and lid of the chopper from the bowl until the blade has

stopped spinning.

 Only use the lid of the chopper, blade and axle unit in the bowl provided.

USING THE WHISK (motor unit, whisk body and removable stainless steel whisk)

 Screw the whisk body onto the screw thread at the bottom of the motor unit. You should

place the symbol ▼ on the motor unit in front of the opened padlock  on the whisk

body and then screw it to the motor unit, so that the closed padlock  ends up in front of

the symbol ▼. Using gentle hand pressure only ensures that the whisk body is fully

tightened onto the motor unit.

 Insert the whisk into the whisk body, making sure that it is tight.

 Press the on/off button.

 Do not touch the whisk while it is moving.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team CMM 5 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info