Bedienungsanleitung Team SIS 14 (Seite 10 von 24) (Deutsch, Englisch, Holländisch, Französisch)

487288

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

10 TEAM SIS 14 - 101117

Assembly page 10/24

Fax +32 2 359 95 50

 Proceed the same way if the water tank stops working or is damaged. To avoid the risk of

electric shock, do not disassemble the iron or steam tank, take it to a qualified technician

for examination and repair. Incorrect re-assembly can cause a risk of electric shock when

the iron or steam tank is used.

 Fully unwind the main cord and supply hose before starting to iron.

 The steam tank switch should always be turned to “0” before plugging or unplugging the

power cord from outlet.

 Unplug the appliance and allow the iron and the water tank to cool down before

cleaning or storing them and for pressurized steam iron station (depending on the model)

before opening, filling or emptying the water tank.

(*) Competent qualified service: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this service.

STEAM IRON: PRECAUTION OF USE AND TEMPERATURES

 Always check first if a label with ironing instructions is attached to the article to be ironed.

Follow these ironing instructions in all cases.

 If ironing instructions are missing but you know the kind of fabric, then see the table for

recommended ironing temperatures.

 When you plug in the appliance, a beep will sound and the ON/OFF button will start

flashing to indicate that the appliance is connected to the mains. To switch on the

appliance, press the ON/OFF switch ; one beep will sound and the ON/OFF button will

remain lighted. The button for high steam output will start flashing and after a few seconds

it will remain lighted, indicating that the steam function is available.

 Set the temperature dial of the iron to the desired position. The pilot light of the iron will

come on, indicating that the iron is heating. As soon as the desired temperature is

reached, the pilot light will go out and you can start ironing.

 During ironing this pilot light will come on from time to time. When this happens, the

soleplate is being heated up to the required temperature again. You can continue

ironing.

 The table is valid for the fibre materials only. If some kind of finish has been applied (gloss,

wrinkle, relief etc.), the textile can best be ironed at a lower temperature.

Kind of textile

Temperature dial

Steam ironing

Nylon

Synthetic (e.g. acetate,

acrylic, viscose,

polyamide, polyester…)

Silk

MIN







Wool







YES

Cotton

Linen







MAX

YES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team SIS 14 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info