Bedienungsanleitung Team SIS 14 (Seite 11 von 24) (Deutsch, Englisch, Holländisch, Französisch)

487288

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

11 TEAM SIS 14 - 101117

Assembly page 11/24

Fax +32 2 359 95 50

First sort out the fabrics according to ironing temperature: wool with wool, cotton with

cotton, etc.

 The iron heats up quicker than it cools down. Therefore, start ironing the articles requiring

the lowest temperature such as those made of synthetic fibres. Then progress to the higher

temperatures.

 If the article is made of a mixture of different fibres, you must always select the lowest

ironing temperature of the composition of those fibres.

(E.g. an article consisting of “60% polyester and 40% cotton” should be ironed at the

temperature indicated for polyester and without steam.)

If you do not know what kind(s) of fabric(s) the article has been made of, find a spot

which will be invisible when wearing or using the article to try out the ironing temperature.

(Always start at a low temperature and increase to one which gives the required results.)

 Pure woollen fabrics (100% wool) may be pressed with the iron set to a steam position. It is

recommended to apply shot-of-steam and use a dry pressing cloth.

When steam-ironing woollen fabrics, shining of the fabric may occur. This can be

prevented by turning the article inside out and ironing the inside or by interposing a slightly

damp cloth.

 Velvet and other textures that rapidly acquire shiny spots should be ironed in one direction

only (with the nap), applying only light pressure.

Always keep the iron moving.

 Iron the reverse side of synthetic materials and silk, it is not advisable to use steam as this

may cause stains.

FILLING WITH WATER (FOR STEAM-IRONING)

1. Put the base on a stable surface.

2. To fill the water tank, pour water into the fill opening of the water tank.

3. Never use vinegar, detergents or other chemical products.

Caution: always make sure that the anti-scale cartridge situated in the water tank is well in

place. Never use the appliance without anti-scale cartridge.

The anti-scale cartridge will remain efficient for 500 hours of use (this average working life may

vary depending on the hardness of the water used). After this time, the appliance cannot be

activated anymore and the cartridge must then be replaced. Please contact the after sales

service of the manufacturer.

FILLING THE WATER TANK DURING USE

As the water tank of this appliance is not under pressure, you can refill it during use. To do so,

just proceed as described above in the "Filling with water" section.

STEAM-IRONING

 Fill the water tank with water.

 As indicated on the temperature dial and in the table, steam ironing is only possible at

higher ironing temperatures, so set the dial to ●● or ●●●.

 Plug in and switch on the appliance. Set the temperature dial of the iron to the desired

position. When the iron has reached the desired temperature, its pilot light will go out. You

can now use the steam function. Choose the type of steam by pressing the corresponding

button (low, medium or high steam output). The high steam output is the default setting.

 Press the burst of steam button to release steam from the soleplate of the iron. Release the

button and the steam will stop. If you want a continuous jet of steam, hold the steam

button down, or slide the locking button of the continuous steam button backwards till it

blocks the continuous steam button. Steam will then be emitted continuously, even if you

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Team SIS 14 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info