Bedienungsanleitung Technics SLC700E (Seite 17 von 20) (Englisch)

618907

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Notes on CDs

∫ Compatible CD

≥ A disc with the CD Logo.

≥ This unit can play back discs that conform to the CD-DA format.

≥ The unit may not be able to play some discs due to the condition of

the recording.

≥ Before playback, finalise the disc on the device it was recorded on.

∫ Compatible MP3 files

≥ Supported format: Files with the extension “.mp3” or “.MP3”.

≥ Compatible compression rate: Between 16 kbps and 320 kbps

(stereo).

≥ Sampling Rate: 32, 44.1, 48 kHz.

≥ Depending on how you create the MP3 files, they may not play in

the order you numbered them or may not play at all.

∫ Compatible WMA files

≥ Supported format: Files with the extension “.wma” or “.WMA”.

≥ Compatible compression rate: Between 32 kbps and 192 kbps

(stereo).

≥ Depending on how you create the WMA files, they may not play in

the order you numbered them or may not play at all.

∫ CD-R/RW

≥ Maximum number of tracks and albums: 499 tracks and 99 albums

(Including Root folder).

≥ Disc formats: ISO9660 level 1 and level 2 (except for extended

formats).

≥ This unit cannot play files recorded using packet write.



≥ This unit can display the “Windows-1252” character code.

Troubleshooting

Before requesting service, make the following checks. If you

are uncertain about some of the check points, or if the

solutions indicated in the following guide does not resolve

the issue, then consult your dealer for instructions.

Heat buildup of this unit.

≥This unit becomes warm when used for a long time. This is

not a malfunction.

A “humming” sound can be heard during

playback.

≥An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this unit.

No sound.

≥Check the volume of the connected device (amplifier, etc.).

≥Check to see if the cable connections to the input and

output terminals are incorrect. If this is the case, turn off

this unit and reconnect the cables correctly.

≥Insert the plugs of the cables to be connected all the way

in.

To return all settings to the factory defaults

When the following situations occur, reset the memory:

≥ There is no response when buttons are pressed.

≥ You want to clear and reset the memory contents.

≥Operation with the touch panel on the unit:

1 Touch [MENU] repeatedly to select “Setup” and then

touch [1/;].

2 Touch [MENU] repeatedly to select “Initialization”.

3 Touch [:, 9] to select “Yes” and then touch

[1/;].

4 Touch [:, 9] to select “Yes” and then touch

[1/;] again.

≥Operation with the SU-C700/ST-C700 remote control:

1 Press [CD].

2 Press [MENU].

3 Press [3, 4] repeatedly to select “Setup” and then

press [OK].

4 Press [3, 4] repeatedly to select “Initialization” and

then press [OK].

5 Press [2, 1] to select “Yes” and then press [OK].

6 Press [2, 1] to select “Yes” and then press [OK]

again.

General

SL-C700-SQT0708_E_mst.book 17 ページ２０１５年６月１２日　金曜日　午後６時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SLC700E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SLC700E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info