Bedienungsanleitung Technics SLC700E (Seite 18 von 20) (Englisch)

618907

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The sound is interrupted.

≥Depending on your environment, the audio may be

interrupted during playback. Check the operating

instructions of the connected device and the connection to

the device.

Playback does not start.

≥Depending on your environment or connected devices, it

may take some time.

The system control function is not working.

≥Connect the system connection cable to the system

terminal [CONTROL2] of the SU-C700.

≥Connect the coaxial digital cable to the digital audio input

terminal [COAX2 IN] of the SU-C700.

The unit turns off automatically.

≥Is the auto off function turned on? (> 14)

≥If the SU-C700 is connected to this unit via the system

control function, this unit may turn off automatically when

you turn off the SU-C700. (> 9, 16)

Incorrect display or play does not start.

≥Make sure that the disc is compatible with this unit. (> 17)

≥There is moisture on the lens. Wait for about an hour and

then try again.

≥Unfinalised CD-R and CD-RW cannot be played back.

Playback takes time to start .

≥It may take some time for the disc to load if there are a lot

of tracks or folders on it.

The remote control does not work properly.

≥To avoid interference, please do not put any objects in front

of signal sensor. (> 7)

≥Change the remote control code if other products react to

this remote control. (> 16)

≥If SU-C700/ST-C700 is selected as the equipment to be

operated, press [CD] and then try the operation again.

(> 8)

≥When this unit and the SU-C700 are connected with an

audio cable, switch the input of the SU-C700 to “LINE”.

Pressing [DIMMER] changes the display, the light

and the indicator brightness of the SU-C700/ST-

C700.

≥[DIMMER] works for the SU-C700/ST-C700 as well as this

unit. Turn off the device that you want to maintain the

brightness level of, and press [DIMMER].

The following messages or service numbers may appear

on the unit’s display.

“Full”

≥The number of programmed tracks is more than 25.

“Not Conditional”

≥The function you have tried to use is not available with the

current settings. Check the steps and settings.

“No Disc”

≥Insert the disc to be played (> 11).

“No File”

≥Insert the disc to be played (> 11).

≥Insert a disc that has MP3/WMA files on it (> 17).

“No Play”

≥A CD that is not in CD-DA , MP3 or WMA format is

inserted. It cannot be played.

≥Examine the content. You can only play supported format.

(> 17)

“Reading”

≥The unit is checking the CD information. After this display

has disappeared, start operating.

“Remote ” (“  ” stands for a number.)

≥The remote control and this unit are using different codes.

Change the code on the remote control.

– When “Remote Mode 1” is displayed, press and hold [OK] and

[1] for at least 4 seconds.

– When “Remote Mode 2” is displayed, press and hold [OK] and

[2] for at least 4 seconds.

-- --:-- --

≥The display time is over 99 minutes and 59 seconds.

Disc

Remote control

（Supplied with the SU-C700/ST-C700）

Messages

SL-C700-SQT0708_E_mst.book 18 ページ２０１５年６月１２日　金曜日　午後６時４９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics SLC700E Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics SLC700E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info