outlet. Not doing so may cause malfunctions.
Follow the steps below to replace the SSD.
Remove all the screws (M3 k 4, Silver),
and take out the SSD.
≥ Use a cross-slot screwdriver to remove the
screws. Choose a cross-slot screwdriver that
matches the size of the screws.
≥
Do not tighten the screws with excessive
force. Doing so will strip their threads,
making it impossible to use the screws again.
Turn the storage tray over with the bottom
side facing up, and attach the new SSD.
≥ Be careful about the orientation of the SSD
and storage tray.
After pulling out the main plug from
the mains outlet, rotate the fixing screw
on the back of this unit to loosen it.
Hold both ends of the storage tray
to pull it out straight.
Storage tray (Top)
Storage tray
(Bottom)
Turn the storage tray over with the
top side facing up, and tighten the
screws (M3 k 4, Silver).
≥ In the same way as in Step 3, hold the SSD
with one hand to prevent it from falling.
Insert the storage tray into this unit,
and tighten the fixing screw.
≥
After inserting the storage tray, tighten the
fixing screw firmly until the tray is secure.
SSD (label side)
Check the fixing screw position.
SSD (gold contacts)
Hold the SSD with one hand to prevent it from
falling.
Format the SSD with “Technics Music
App“. (> 24)
For details, refer to the user guide for
“
Technics Music App
“
.
Flip over the
tray.
SSD
