Bedienungsanleitung Technics ST-G30L (Seite 24 von 32) (Englisch)

622384

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Troubleshooting

This unit becomes warm when used for a long time.

This is not a malfunction.

Panasonic is constantly improving the unit’s

firmware to ensure that our customers are enjoying

the latest technology.

Check the support site below

www.technics.com/support/

When the following situations occur, reset the memory:

≥ There is no response when buttons are pressed.

1 Disconnect the mains plug.

≥ Before proceeding to Step 2, wait for at least

3minutes.

2 Connect the mains plug while pressing and

holding [Í/I].

The main unit will turn off after all the indicators

on its front side flash.

≥ All settings will return to the factory defaults. It

is necessary to set the memory items again.

Follow the steps below to delete music or settings

stored on the SSD of this unit.

≥ You want to clear and reset the memory contents.

1 Start the app “Technics Music App”.

2 Tap “ST-G30 Menu“, and then tap “Technics

ST-G30******“.

≥ “******“ stands for a digit that is unique to

each set.

3 Tap “Settings“, and then tap “Initialize“.

4 Tap “Delete account information“ to delete

your account information.

≥ To clear account information, select “OK“.

5 Select “Format SSD“ in Step 4, and repeat the

same operation.

The unit does not work.

Operations are not done properly.

≥ One of the unit’s safety devices may have been

activated.

1Press [Í/I] on the unit to switch the unit to

standby.

≥ If the unit does not switch to standby, press

[Í/I] on the unit for at least 5 seconds. The

unit is forcibly switched to standby.

Alternatively, disconnect the AC mains lead,

wait for at least 3 minutes, then reconnect it.

2Press [Í/I] on the unit to switch on. If the unit

still cannot be operated, consult the dealer.

A “humming” sound can be heard during

playback.

≥ An AC mains lead or fluorescent light is near the

cables. Keep other appliances and cords away

from the cables of this unit.

≥ A strong magnetic field near a TV or other device

may adversely affect the audio quality. Keep this

unit away from such devices.

≥ The speakers may output noise when a device

nearby is emitting powerful radio waves, such as

when a mobile phone is on a call.

No sound.

≥ Adjust the volume of the connected device

(amplifier, etc.).

≥ Check to see if the cable connections to the input

and output terminals are incorrect. If this is the

case, turn off this unit and reconnect the cables

correctly.

Before requesting service, make the following checks. If you are uncertain about some of the check points, or if

the solutions indicated in the following guide does not resolve the issue, then consult your dealer for instructions.

Heat buildup of this unit

Do you have the latest firmware installed?

To return all settings to the factory

defaults

To delete music and settings stored

on the SSD

General

ST-G30-SQT1219_mst.book 24 ページ２０１６年１月２８日　木曜日　午後６時３０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technics ST-G30L Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technics ST-G30L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info