536099
157
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
157
QQTG0692
Sound Edit
Part X Sound Edit
Outline of the Sound Edit
SOUND EDIT enables you to create your own new sound by altering one of the this instrument’s preset
sounds. Your new sound can be stored in one of the sound memory locations. SOUND EDIT has two
methods of use. You can edit in detail using functions more commonly associated with a synthesizer, or
you can use EASY EDIT which allows you to change some basic parameters on one page.
1.
Select a sound to edit.
2.
Turn on the PROGRAM MENUS button.
The display looks similar to the following.
3.
Select SOUND EDIT.
The display looks similar to the following.
4.
Select the desired menu and follow the proce-
dures on the corresponding setting display.
To check the sound of a single tone, press the
SOLO button to highlight the SOLO indication.
Only the currently selected tone sounds when
a key is played.
When the TEMPO/PROGRAM indicator is lit,
it indicates that the TEMPO/PROGRAM is
available for setting the current function.
5.
When the sound is just the way you like it, on
the SOUND EDIT MENU display press the
WRITE button to store your new sound.
Press the EDITED (or ORIGINAL) button to
switch between the modified sound (EDITED)
and the original sound (ORIGINAL). This
allows you to compare the edited sound to the
original sound as you are modifying it.
PROGRAM
MENUS
EASY EDIT (page 158)
The most often used edit functionssuch
as brightness and attack speedare
assembled on one display for easy sound
modification.
TONE (page 159)
Modify the tones which make up the sound.
PITCH (page 162)
Adjust the settings related to the pitch.
FILTER (page 163)
Adjust the amount of frequency cut in spe-
cific frequency ranges.
AMPLITUDE (page 165)
Volume settings.
LFO (page 167)
Cyclic modulation settings.
EFFECT (page 168)
Settings related to the various effects
applied to the sound.
CONTROLLER (page 169)
Specify how wheel operation etc. affects
the sound.
Summary of the SOUND EDIT menu items
15_Part X.fm 1 57 ページ 2003 年2月5日  水曜日 午後1時5 5分
157

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technics SX-KN2400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info