536099
159
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
Part X Sound Edit
159
QQTG0692
Sound Edit
Tone Edit
Modify the separate tones which comprise the sound.
About tones
A sound may be made up of at most four tones.
A special process is used to produce real-
sounding piano type tones. For this reason,
some edit procedures for piano sounds, FIL-
TER or AMPLITUDE for example, may differ
from those for other sounds.
TONE SELECT
1.
On the SOUND EDIT menu, select TONE.
The display looks similar to the following.
2.
Use the buttons to the left of the display to
select the tone you wish to edit (1st, 2nd, 3rd,
4th).
Use the and buttons to select a setting
item and then the
and
buttons to specify a
selection.
Use the ON/OFF buttons to select ON or OFF.
3.
Select a sound for the tone.
Use the GROUP
and
buttons to select the
group, and the TONE NAME
and
buttons
to select the sound.
A
mark in the DYNAMICS column indi-
cates that a TONE DYNAMICS change was
made to the sound.
4.
Use the LEVEL
and
buttons to adjust the
volume.
5.
Use the KEY
and
buttons to set the pitch
of the output sound.
6.
Use the DETUNE
and
buttons for fine
adjustment of the pitch deviation.
7.
Use the PANNING MODE
and
buttons to
select mode. (NORMAL, RANDOM, STE-
REO R, STEREO L)
If STEREO R or STEREO L is selected for
the MODE, the balance is fixed (cannot be
moved).
8.
Use the PAN
and
buttons to adjust the
stereo balance.
CTR is the center point. At L64, the sound is
all the way to the left, at R63 all the way to
the right.
9.
Use the DELAY
and
buttons to adjust
the delay time of the sound.
The higher the number, the longer the delay
before sound output.
10.
Use the TRIGGER
and
buttons to select
a trigger mode.
KEY ON:
The normal mode, in which sound is emitted
when the key is played.
KEY OFF:
Sound is emitted when the key is released
(like muted strings, for example).
LEGATO:
Sound is emitted only when the key is played
legato.
NON LEG:
Sound is not emitted when the key is played
legato.
SOUND
1st tone
2nd tone
3rd tone
4th tone
15_Part X.fm 1 59 ページ 2003 年2月5日  水曜日 午後1時5 5分
159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technics SX-KN2400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info