4 Connections
The references mentioned below, i.e. a b c etc.
refer to the illustration on page 10.
4.1 External installation
a Use a suitable co-axial cable to connect the LNC
input of the digital receiver with the LNC of your
external installation. Please also note Point 6
"Settings".
4.2 Connection to a television set
b Use a SCART cable to connect the receiver (SCART
socket TV) with the television set (SCART socket).
If your television set is appropriately equipped, it will
switch automatically to AV, and thus to satellite recep-
tion, when the digital receiver is switched on.
4.3 Video cassette recorder (VCR)
c Connect the video recorder to the SCART socket mar-
ked VCR. In Playback mode, the video recorder will
supply a switching signal to the digital receiver, thus
supplying the video recorder signal automatically to
the television set.
If your video recorder does not supply a switching sig-
nal, use the 0/AV key to switch your digital receiver to
the external input AV. Pressing this key again will
return you to normal viewing operation.
4.4 Hi-Fi amplifier
4.4.1 Analogue
d To achieve the best possible sound quality, you may
connect the digital receiver to a Hi-Fi amplifier. Use a
suitable cable to connect the cinch sockets Audio R
and Audio L of the digital receiver with an input of
your Hi-Fi amplifier (e.g. CD or AUX - note that the
Phono input is not suitable).
4.4.2 Digital
d If your amplifier is equipped with a suitable electrical
or optical input, connect the socket AUDIO OUT
DIGITAL electrical resp. AUDIO OUT DIGITAL
optical with the electrical resp. optical input of your
amplifier.
Depending on the station selected, sampling rates of 32,
44.1 and 48 kHz are available.
11
