mes) and for encrypted programmes. Where available from the provider, the recommen-
ded age restriction as well as the programme genre will also be indicated.
7.3 Volume control
You have the facility to adjust the volume of your digital receiver. This makes operating the
receiver even more convenient, since you can access all important functions from a single
remote control, and will rarely have to use the remote control of your television set. When
the digital receiver is switched on it will reproduce sound at the volume level last set.
> Adjust the volume of your digital receiver using the Volume + key to increase volu-
me, and the Volume - key to make it softer.
> Press the Sound on/off key to switch the sound off (mute), press the same key
again to switch the sound back on.
7.4 Selecting a different language
If a programme is broadcast in several languages, or with various soundtracks, proceed as
follows to select a different language or sound channel:
> Press the Language Select key. Alist of languages currently broadcast will be
displayed on screen.
> Use the arrow keys up/down to select the desired language.
> Confirm by pressing OK.
You can now listen to the programme in the desired language. Your digital receiver can also
receive mono broadcasts.
> Use the arrow keys right/leftto choose between Mono Channel 1 ( ), Mono
Channel 2 ( ) and Stereo ( ).
7.4.1 Dolby Digital (AC3 mode)*
If a programme is broadcast in Dolby Digital sound, this will be indicated by the Dolby logo in
the information window when you switch to the programme. If the Dolby Digital (AC3) func-
tion has been enabled as per Point 6.3.6, this programme will automatically be reproduced in
this format.
If you have not switched on the function Dolby Digital (AC3), switch your receiver to AC-
3 mode manually as follows:
> Press the Language Select key. If available, a list of the languages currently
being broadcast as well as Dolby Digital (AC 3)will be displayed on screen.
> Use the arrow keys up/down to mark the line Dolby Digital.
> Confirm by pressing OK.
You can now enjoy the programme in full 5.1 channel Dolby Digital sound. If you would like
your receiver to recognise and reproduce Dolby Digital broadcasts automatically, you should
set your receiver to automatic AC3 reproduction as described in Point 6.3.6.
7.5 TV/Radio switching
The pre-programming setup contains not only television programmes, but radio programmes as well.
> Press the TV/Radio key to switch the digital receiver to radio mode.
The receiver will now play the radio programme last selected.
> Press the TV/Radio key again to return to the television programme last viewed.
18
