144270
40
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
Please note!
The device may only be operated with the installed hard disk. Otherwise, you might damage the
unit.
Never open the device and do not exchange the hard disk, because the warranty is otherwise
void.
7.3.4 Exit hard disk management
> Press the Return key to return to the next highest menu level.
or
> Return to standard operation by pressing the TV/Radio key.
8 Settings
The OSD menu enables you to carry out many device settings with only a few keystrokes.
The set values are stored automatically when you exit the menu.
> Call the main menu by pressing the Menu key.
> Use the up/down arrow keys to select the Settings line.
> Acknowledge with OK.
The Settings menu is displayed.
8.1 Picture / HDMI / VGA settings
Picture settings can be accomplished by means of the sources TV, Radio, Euro-AV 1,
Euro-AV 2, Video/S-Video and YUV and also apply to the picture of recordings played back
from hard disk recordings. The HDMI settings are accomplished from the sources HDMI 1 and
HDMI 2 and the VGAsettings in VGA mode. In order to accomplish picture, HDMI or VGA set-
tings, proceed as follows:
> Use the up/down arrow keys to select the Picture settings line,
HDMI settings or VGA settings.
> Acknowledge with OK.
The Picture settings, HDMI settings, or VGA settings menu is displayed.
8.1.1 Calling preset picture settings
There are two specified settings for various picture values, which you can call. The picture set-
tings can then be adjusted to your requirement as described in the following
> The preset picture settings can be called by pressing the green Natural control key or
the yellow Intensive control key.
8.1.2 Manually adjusting picture values
Light control
Select here, whether the adaptation of the background lighting to the ambient brightness should
be accomplished automatically (Auto 1, Auto 2 or Auto 3) or whether you would like carry
this out manually.
> Select the light control line with the up/down arrow keys.
> Set the light control with the right/left arrow keys to Auto 1, Auto 2, Auto 3 or
manual.
40
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 40
Downloaded from www.Manualslib.com manuals search engine
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Technisat hd vision 32 pvr wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Technisat hd vision 32 pvr

Technisat hd vision 32 pvr Datenblatt - Holländisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info