Bedienungsanleitung Technivorm KB741 (Seite 9 von 48) (Französisch, Spanisch)

120929

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

8. Switch the power switch to the “on” position.

· Thermal carafe model: The orange light will illuminate when the

thermal carafe is placed properly against the white button.

· Glass carafe models with a hot-plate adjustable switch:

Set hot-plate switch to the HI position,

lower when pot reaches ½ full, or if you

prefer a less warm holding temperature.

9. The brew process will quickly begin; water will be brought to a

boil, rising through the brewer across the outlet arm and into the

brew-basket. Brew process is complete in 4 – 6 minutes.

10. We recommend disposing of coﬀee grounds once brew cycle

is complete.

· For models with adjustable brew-baskets: Move the slide to closed

position prior to emptying.

11. The brewer should be switched oﬀ after use.

• Thermal carafe models:

· The heating element is not receiving power unless the water

reservoir is full, engaging the ﬂow-switch, and the white button is

depressed; the only power consumption is at the power switch itself,

resulting in a very energy-eﬃcient brewer.

• Glass carafe models:

· Should be turned oﬀ when hot-plate use is no longer desired.

· Optional Auto-oﬀ models will automatically shut oﬀ in 100 minutes.

Now enjoy a perfect cup of coﬀee, brewed to industry standards

with your new Technivorm Moccamaster!

Coﬀee tastes best immediately after brewing!

DIRECTIONS FOR USE

1. Power switch should be in the oﬀ position.

2. Position 9-hole outlet arm as shown in the diagram.

· Attach snuggly to the silicone gasket at the top of the

cool water reservoir.

3. Fill cool water reservoir to the desired level, with fresh ﬁltered

or bottled cool water. Replace cool water reservoir lid.

· Reservoir is marked with the number of European cups: 4 oz. each.

4. Place ﬁlter in brew-basket.

· Place a standard #4 white paper ﬁlter into the brew-basket.

5. Add the appropriate amount of coﬀee.

· For a full 10 cups, we recommend 7 level scoops (2 Tbsp each).

· The SCAA approved industry standard for the perfect cup is

2 tablespoons to every 6 oz. of water.

· We caution against the use of a gold mesh reusable ﬁlter; they tend

to retain coﬀee oils and clog very quickly, resulting in an overﬂow of

the brew-basket and ﬁlter.

6. Place brew-basket on bracket, position outlet arm over center

of brew-basket.

· For manual adjust brew-basket models, adjust slide to open position.

 CAUTION: Brew-basket will overﬂow in a closed position.

· Replace brew-basket lid.

 CAUTION: Scalding may occur if any of these parts are removed

during brew cycle.

7. Carafe placement:

· Place the glass carafe, with lid, on the hot-plate.

· Place thermal carafe, with the “brew-thru-lid” in brew position

beneath the brew-basket bracket. (Carafe should be placed to

depress the white button). We recommend warming the thermal

carafe with hot water before use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technivorm KB741 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technivorm KB741

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info