Bedienungsanleitung Technivorm KB741 (Seite 11 von 48) (Französisch, Spanisch)

120929

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Basic Cleaning

• Clean the brewer regularly with a moist cloth and wipe dry. After each

use, hand wash the carafe and brew-basket with mild detergent.

Rinse thoroughly. Carafe is not dishwasher safe. Thermal carafe coﬀee

oil stains may be removed by placing a small amount of dishwasher

detergent and water in carafe and allowing it to soak overnight or we

recommend the use of Cleancaf® by Urnex®.

• Do not submerge brewer in liquid.

Descaling Your Brewer

• Your coﬀee maker must be descaled regularly to maintain

optimal performance.

• When mineral deposits build up in the heating element of your

Technivorm Moccamaster, it can clog the water ﬂow and aﬀect

the brew temperature and saturation time. If not descaled regularly,

the brewer can stop working.

• Descaling products are designed to break down the lime scale and

mineral buildup inside your brewer to ensure consistent brewer

functionality and great coﬀee. We recommend the use of Dezcal™

by Urnex® for descaling your brewer.

• Vinegar may not eﬀectively descale your brewer and can be diﬃcult

to thoroughly rinse. Vinegar may also leave behind an odor that could

aﬀect future brews.

• Technivorm Moccamaster recommends descaling your brewer every

100 cycles (easily remembered after every box of 100-count ﬁlters) or

a minimum of every 3 months.

• Cleaning powders are designed to remove coﬀee oils from the

brew-basket, carafe, etc.

• After descaling, run two brew cycles with water.

Anti-Frost Protection and Extended Storage Guidelines

• Turn the brewer oﬀ and remove the electrical plug from outlet.

• Remove the 9-hole outlet arm.

• Empty any remaining water within brewer by holding it upside down

over the sink.

• Replace the 9-hole outlet arm before using the brewer again.

FREQUENTLY

ASKED QUESTIONS

Why is my brewer not heating to 200° F?

The Technivorm Moccamaster Coﬀeemakers operate on the scientiﬁc

principle of bringing water to a boil. It is this boiling action that causes

the transfer of the water to the brew-basket. If the water is not heated

to the boiling point, it will not move to the brew-basket. The brewer

is designed to move the proper amount of water (40 oz.) in the

correct amount of time (5 minutes). This is the correct water contact

time needed for the proper extraction.

What is the total brewing time for my Technivorm?

The complete brewing cycle should take 4 – 6 minutes. However, if the

coﬀee brewer is not descaled regularly, the scale/lime buildup could

result in a slower brew time or simply cease functioning—the lights will

be on, but the water transfer will not function until descaled with a

product such as Dezcal™ by Urnex®.

Why doesn’t the Technivorm have a timer?

A great cup of coﬀee starts with cool, fresh, ﬁltered or bottled water and

freshly ground or pre-ground packaged coﬀee to achieve the perfect

cup. When water is left in water reservoir overnight, it is depleted of

oxygen, which is essential to brewing a perfect cup of coﬀee.

NOTE: Technivorm Moccamaster is fast; it only takes 30 seconds to start

the brew process, with completion in 4 – 6 minutes.

Do the brewers automatically “shut oﬀ” after a set period?

The glass carafe models with the Auto-oﬀ option will shut oﬀ at

100 minutes. Glass and thermal carafe models without this option

will need to be manually shut oﬀ after each use.

NOTE: The heating element is not using power or activated

except during the brew cycle when the water reservoir ﬂoat switch

is engaged.

Why does this brewer have so many removable parts?

Parts that come in contact with coﬀee have been designed to be removable

for cleaning and replacement purposes. Clean equipment is critical to

brewing good coﬀee.

How do I order replacement parts?

Contact your local retailer for parts, which may also be ordered

online at www.moccamaster.com/parts or by calling

Technivorm Moccamaster Customer Service at 1.855.662.2200.

See pages 14 –15 for replacement parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Technivorm KB741 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Technivorm KB741

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info