Bedienungsanleitung Techno line WS9008 (Seite 13 von 75) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801425

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

EN3

No RCC signal received

Receiving RCC signal Receiving RCC signal

Alarm off

4. After 5 minutes channel searching, it will turn to DCF signal reception

automatically.

5. Radio Controlled function, the current time & date automatically synchronized

with the time signal transmitted from Germany (DCF77).

Note:

 If no display appears on the LCD after installing the batteries, press the [ RESET ]

key by using a metal wire.

 You may not receive the DCF77 and wireless sensor(s) signal immediately. Due

to the atmospheric disturbance, the best reception for DCF often occurs

during night time.

Install the table stand

The unit is designed for desktop or wall mount for easy viewing. The following step is

for table stand installation.

Step 1 Step 2 Step 3

Set LCD display viewing angle

Press [ DOWN /MOON] button in normal mode to adjust LCD viewing angle to fit

table stand or wall mount situation.

Use the LCD backlight

In normal mode, press [ SNOOZE / LIGHT ] button to turn on backlight for 5 seconds.

Pairing additional wireless sensor/s (optional)

This console can support up to 3 additional wireless thermo-hygro sensor(s). You can

press [ SCAN ] key to search the corresponding channel's sensor manually. Once

your sensor paired up, the sensor signal strength indicator and weather reading will

appear on your console display.

Note:

 The additional wireless sensor(s) is not included

 Select CH 1, 2 or 3 in the wireless sensor

 Please check the additional sensor's user manual for more detail of the

installation.

View multiple wireless sensor channels (optional)

1. In normal mode, press [ UP / CH ] key to switch the display between CH 1~3.

2. In normal mode, press and hold [ UP / CH ] key for 2 seconds to enter auto-

cycle mode, After a confirmation tone, it will alternately display the CH 1~3 at 4

second intervals.

3. During auto-cycle mode, press [ UP / CH ] key again to stop auto-cycle mode

and display the current channel.

Reception of radio-controlled signal

The time and date are radio-controlled. The current time and date are

automatically synchronized with the time signal transmitted from Germany

(DCF77).

When used for the first time (after inserting the batteries or pressing the [ RESET ]

key), the clock will start to receive the RC signal after 5 minutes with the signal

strength indicator flashing. You can also press [ RCC ] key to receive the DCF signal

once.

DCF77 signal reception icon

The signal indicator shows signal receive status. The signal receiving status

could be classified into 3 types:

Note:

 Every day the weather station will automatically search for the time signal at

2:00, 3:00 and 4:00 .

 Always place the unit away from interfering sources such as TV set, computer,

etc. Avoid placing the unit on or next to metal plate.

 Closed area such as airport basement, tower block or factory is not

recommended. Do not start reception on a moving vehicle or train.

 User can permanent disable or enable the RC function by press and hold the [

RCC ] key for 8 seconds. OFF appears when the function was disabled.

Daylight saving time (DST)

This clock has been programmed to automatically switch when the daylight saving

time is in effect. User can disable the DST function in time and calendar setting mode.

Note:

DST AUTO/OFF setting only available when RCC function is ON.

Time & calendar setting and display

Manual time & date setting

In normal mode, press and hold [TIME] key for 2 seconds to enter date and time

setting mode.

Press [ UP / CH ] or [ DOWN /MOON] key to adjust the setting.

No DCF signal received

Receiving DCF signal

Received DCF signal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9008 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info