Bedienungsanleitung Techno line WS9008 (Seite 14 von 75) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801425

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

EN4

Press [TIME] key to enter the next setting.

The setting sequence: 12/24 format -> hour -> minute -> second -> year -> date-

month /month-date -> month -> day -> ± 23 time zone -> weekday language -> DST

AUTO/OFF

Press [TIME] key or leave the unit for 60 seconds to complete the setting and return

to normal mode.

Weekday language: EN -> FR -> DE -> ES -> IT -> NL -> RU

View time

In normal mode, press [TIME] key to switch between seconds and weekday display.

Alarm time setting and display

1. In normal mode, press and hold [ALARM] key for 2 seconds until alarm hour

digit flashes to enter alarm time setting mode.

2. Press [ UP / CH ] or [ DOWN / MOON] key to change the value. Press and hold

the key for quick adjust.

3. Press [ALARM ] key again to step the setting value to Minute with the Minute

digit flashing.

4. Press [ UP / CH ] or [ DOWN / MOON] key to adjust the value of the flashing

digit.

5. Press [ALARM] key to save and exit the setting.

Note:

 In alarm mode, the “"icon will display on the LCD.

 The alarm function will turn on automatically once you set the alarm time.

Activating alarm and temperature pre-alarm function

1. In normal mode, press [ALARM] key to show the alarm time for 5 seconds.

2. When the alarm time displays, press [ALARM] key again to activate the alarm

function.

Or press [ALARM] key twice to activate the alarm with ice pre-alarm function.

Once the ice pre-alert activates, the pre-set alarm will sound and alert light will flash

30 minutes earlier if the outdoor temperature is below -3°C.

When clock reach the alarm time, alarm sound will start. Where it can be stopped

by following operation:

 Auto-stop after 2 minutes alarming if without any operation and the alarm will

activate again in the next day.

 By pressing [ SNOOZE / LIGHT ] key to enter snooze that the alarm will sound

again after 5 minutes.

 By pressing and hold [ SNOOZE / LIGHT ] key for 2 seconds to stop the alarm

and will activate again in the next day.

 By pressing [ALARM] key to stop the alarm and the alarm will activate again in

the next day.

Note:

 The snooze could be used continuously in 24 hours.

 During the snooze, the alarm icon “ ” will keep flashing.

Wireless sensor signal receiving

The console display signal strength for the wireless wind speed 3-IN-1 sensor, as per

table below:

1. If the signal has discontinued and does not recover within 15 minutes, the

signal icon will disappear. The wind speed, temperature and humidity will

display “- -” for the corresponding channel.

2. If the signal does not recover within 1 hour, the wind speed, temperature and

humidity will display “Er” for the corresponding channel, if over 48 hours, the “Er”

display will become permanent. You need to replace the batteries and then press

[ SCAN ] key to pair up the sensor again.

View the outdoor channel (Optional feature for additional thermal-hygro sensors)

This console can pair with a wireless wind speed 3-IN-1 sensor and up to 3 wireless

thermal-hygro sensors. If you have 1 or more additional sensors, you can press [ UP /

CH ] key to switch between different wireless channels in normal mode, or press and

hold [ UP / CH ] key for 2 seconds to toggle auto-cycle mode to display the connected

channels at 4 seconds interval and the " " icon will show on the display.

During auto-cycle mode, press [ UP / CH ] key to stop auto cycle and display the

current channel.

Temperature and humidity trend

The Barometric pressure, temperature and humidity trend indicator shows the trends

of changes in the forthcoming few minutes. Arrows indicate a rising, steady or falling

trend.

Note:

 If no signals are received or the transmission is interfered, “- -” will appear on the

LCD.

 Relocate the console or transmitter in other positions and make sure the outdoor

sensor is within the effective range of 150m straight distance approx.

Alarm off

Alarm on

Alarm with ice-alert

No signal

Weak signal

Good signal

Trend

Arrow indicator

Rising

Steady

Falling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Techno line WS9008 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info