Bedienungsanleitung Tecomec MIDI Jolly (Seite 8 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

640528

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

easy grinder

• if the knob is turned clockwise, the chain is locked between the

two jaws, for precise and safe grinding (photo 11)

- grind all teeth of the same type (right) before turning the vise on

the opposite side, to start grinding left teeth (photo 12), without

touching the chain feed register screw (photo 8 - point 1)

At the end of grinding operations, turn off the grinder, disconnect

the cable from the mains, and remove the grinder, placing it in a

safe place, away from children.

N.B. If the chain depth gauge is too high with respect to the tooth

(usually after 2/3 grinding operations), lower it using a at le

(photo 13). For the height of the depth gauge, consult the chain

table enclosed at the end of the handbook (column M).

N.B.

- do not use cooling uids while grinding

- if, when you turn the switch to “1”, the grinder does not start,

and if when the switch is in the “0” position the grinder does

not stop, promptly disconnect the power cable from the mains

- if the wheel is banged or hit by accident during grinding,

follow the instructions provided in paragraph ASSEMBLY AND

WARNINGS ABOUT THE GRINDING WHEEL

TROUBLESHOOTING

- The machine does not start:

- check that the plug is perfectly connected to the outlet

- check that the power cable of the machine is not damaged

- check that the outlet is energized

- check that no fuses have blown in the outlet

- check that the automatic circuit-breaker has not tripped.

If, after these operations, the failure to start can be attributed to the

machine, have it checked by an authorized service center.

- The connection of the machine to the mains makes the

automatic circuit-breaker trip:

- contact an authorized service center.

- The machine’s electrical motor is overheated:

- check that the voltage indicated on the data plate meets the mains

voltage

- comply the max. time (15 min.) recommended for continuous

operation

- check that la wheel does not block during grinding

If the problem persists, contact and authorized service center.

- The direction of rotation of the wheel is the opposite of that

indicated on the machine:

- contact an authorized service center

- The machine shows signs of anomalous vibrations:

- check that the machine is secured to the work bench

- check that the motor unit is secured to the base unit

- check that the wheel is properly installed on the relevant centering

hub

If the problem persists, contact and authorized service center.

MAINTENANCE

- always disconnect the plug from the socket before carrying out any

maintenance, lubrication or cleaning operations

- the grinder must be kept clean, in order to make safety instructions

and plates clearly legible. Clean it using a rag or a swab.

- do not use compressed air, that is likely to bring the metal dust

in positions where they cannot be reached, damaging essential

components of the grinder.

DEMOLITION AND DISPOSAL

The machine is to be demolished by qualied personnel in

compliance with current laws in force in the country in which it is

installed.

The symbol

(on the rating nameplate) points out that the

product must not be disposed of with normal household garbage.

Contact an authorized tip or your dealer for disposal instructions.

Before you scrap the machine, make it unusable by cutting

the power supply cable for example and make the parts

safe, which could cause a source of danger for children if

they should play with the machine.

WARRANTY

- the validity of the warranty on this product is subject to the

recognition of the country of sale. To be valid, any claim

must be accompanied by a copy of the purchase documents

(invoice or cash voucher). For any repairs, the machine must be

sent, carriage free, to your dealer.

- The warranty will be void if:

a) the grinder has been tampered with;

b) the grinder has not been used according to this manual;

c) non-original and/or unauthorized parts, tools, or grinding wheels

have been tted on the machine;

d) the grinder has been connected to voltage values other than the

one stated on the serial number plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tecomec MIDI Jolly Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info