Bedienungsanleitung Tecomec Super Jolly 120V (Seite 4 von 28) (Englisch, Französisch, Spanisch)

640545

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

! CAUTION - SETTING UP THE GRINDER

The grinder must only be used in a place that is protected from dust and

dampness, that is well-lighted, out of the reach of children, and away from

gasses or other inammable or explosive liquids.

The grinder must be situated near a normal electrical outlet equipped with

earth (grounded).**Avoid using dangerous extension cables.

**GROUNDING INSTRUCTIONS.

A. In the event of malfunction or breakdown, grounding provides a path of least

resistance for electric current to reduce the risk of electric shock. This tool is equipped

with an electric cord having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into a matching outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not t the outlet, have the proper outlet

installed by a qualied electrician.

Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. The conductor with insulation having an outer surface that is green

with or without yellow stripes is the equipment-grounding conductor. If repair or

replacement of the electric cord or plug is necessary, do not connect the equipment-

grounding conductor to a live terminal.

Check with a qualied electrician or service personnel if the grounding instructions are

not completely understood, or if in doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole

receptacles that accept the tool’s plug. Repair or replace damaged or worn cord

immediately.

B. Grounded, cord-connected tools intended for use on a supply circuit having a

nominal rating less than 150V~. This tool is intended for use on circuit that has an

outlet that looks like the one illustrated in sketch A in gure. The tools has a grounding

plug that looks like the plug illustrated in sketch A in gure. A temporary adapter,

which looks like the adapter illustrated in sketches B and C, may be used to connect

this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is

not available. The temporary adapter should be used only until a properly grounded

outlet can be installed by a qualied electrician. The green-colored rigid ear, lug, and

the like, extending from the adapter must be connected to a permanent ground such

as a properly grounded outlet box.

GROUNDING PIN

COVER OF

GROUNDING

OUTLET BOX

METAL SCREW

ADAPTER

GROUNDING MEANS

Grounding methods

2. GENERAL INFORMATION

The manufacturer is not liable for damages in the following cases:

- failed observance of the instructions given herein;

- use of the appliance other than that described in the “INTENDED USE” section;

- failed use in compliance with current standards on Health & Safety at the workplace;

- Incorrect installation;

- lack of scheduled maintenance;

- modications or jobs that are not authorized by the manufacturer;

- use of non-original or inadequate spare parts;

- repairs that are not carried out by a specialist.

3. WARRANTY

The warranty validity is that acknowledged in the country of sale. Claims under

warranty will only be accepted if they are backed-up by the copy of the purchase

document (bill or receipt).

The guarantee becomes void if:

a) the appliance has been tampered with;

b) the appliance has not been used according to this manual;

c) non-original parts, appliances or grinding wheels have been tted on the grinder

or other parts that are not authorized by the manufacturer;

d) the appliance has been powered at a voltage or frequency different from that

written in the rating nameplate.

4. USING AND KEEPING UP THE OWNER’S MANUAL

The characteristics and the information given in this manual are merely indicative. The

manufacturer reserves the right to add any modications to the grinder considered

necessary at any time.

It is forbidden to reproduce any part of this document without authorization on behalf

of the manufacturer.

The owner’s manual is integral part of the appliance and must be kept in a safe place

so that it can be consulted whenever need be.

If you should loose your manual or it should deteriorate, you can request your dealer

or an authorized service centre for another copy.

The manual shall accompany the appliance at all times, especially if it is sold on at

a later date.

5. DEFINITIONS

Skilled technician: a person who is generally employed by the service centre and who

is trained to carry out extraordinary maintenance jobs and repairs on the appliance.

6. SYMBOLS

This symbol points out the possibility of serious personal injuries if the

provisions and instructions are not complied with.

This symbol points out that the user must wear protection goggles when

he uses the appliance.

This symbol points out that the user must wear protective gloves when

he uses the appliance.

This symbol points out the correct running direction of the appliance

(grinding wheel).

7. TECHNICAL DATA

Model Super Jolly - Speed Sharp Auto

Voltage 120V~ 60Hz

Rated power 300W

Grinding wheel dimensions

Outside Ø 145 mm - Inside Ø 22,2 mm

Thickness: 3,2 - 4,7 - 6,0 mm

Maximum speed of grinding wheel 2800 min

-1

3400 min

-1

Max. power of lamp 15W

Acoustic pressure level 79 dB(A)

Level of vibrations on operating

handle

< 2,5 m/s

Types of chains that can be

sharpened

1/4” - .325” - 3/8” - .404” - 3/4”

Weight (complete machine) 7,7 kg

8. PART DESCRIPTION (FIG.1)

1 Base unit 11 Arm operating handle

2 Arm-motor unit 12 Shield guard

3 Vise assembly 13 Supplementary plastic arbor guard

4 Chain gauge setting knob 14 Grinding wheel

5 Vise adjustment knob 15 Sharpening depth setting knob

6 Chain jaws 17 Lamp

7 Chain blocking unit adjustment knob 18 Main ON/OFF switch

8 Chain blocking unit adjustment knob 19 Electrical power cable

9 Chain blocking unit 20 Rating nameplate

10 Arm blocking handle

9. SAFETY DEVICES

The grinder is equipped with the safety devices illustrated hereafter:

- Shield guards: they protect the operator from parts of the grinding wheel that may

come away during the sharpening process.

These guards must always be tted in place when the appliance is in use.

Always make sure the guards are efcient and tted properly. Operator safety could

be compromised if the guards are damaged and/or cracked.

- Switch: the appliance features a safety switch with release coil. In the case of a

sudden power failure, the switch trips automatically and disconnects the appliance

from the mains. The appliance will not start even if the power supply is suddenly

restored. You need to reset the switch to start the appliance again.

10. INTENDED USE

This appliance is an electrical grinder for chains used in chain saws.

- Use the appliance exclusively for the types of chains stated in the technical data

chart.

- Do not use the appliance to cut or grind anything other than the chains envisaged.

- Secure the appliance rmly to the bench or wall.

- The appliance must not be used in corrosive or explosive environments.

- Any other use is to be considered improper.

The manufacturer is not liable for damages following improper or incorrect use of

the appliance.

11. UNPACKING

The grinder is supplied already completely assembled.

12. STANDARD SUPPLY (FIG.2)

1 -

Grinder base unit

9 - Sharpening template – 3/4’’

2 -

Instruction manual

10 - Dressing brick

3 -

Test card

11 - 4 mm Allen wrench

4 -

Grinding wheel Ø 145x3.2x22.2

12 - 5 mm Allen wrench

5 -

Grinding wheel Ø 145x4.7x22.2

13 - M8x80 screw

6 -

Grinding wheel Ø 145x8x22.2

14 - M8 nut

7 -

Operating handle

15 - Washer for M8 screw

8 -

Sharpening template

Tecomec Super Jolly 120V Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info