Bedienungsanleitung Tecsun PL310 (Seite 11 von 16) (Englisch)

628128

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

LISTEN TO THE RADIO

920

0.01 MHz

1kHz

1 kHz

0.1 MHz

9 /10kHz

9 kHz

5 kHz

step

band

turning step

slow tuning mode

Fast tuning mode

FAST/SLOW tuning is shown in the chart below for each band.

Method 3: Direct key-in frequency

Use the numeric keypad to enter the frequency directly.

Note: No need to enter decimal point for FM Band when

input the frequency numbers. For example, FM 89.0 MHz,

just key in 8 9 0 .

Turn LW on/off

Turn off the radio. Press and hold the [MW/LW] button until

" " or " " appears in the display，If " " appears

in the display, which means LW is turned off.

Turn off the "Bi" sound

Press and hold the [ ] button until " " or " "

appears in the display; If " " appears in the display,

which means "Bi" sound is turned off.

Turn on / off intelligent lighting function

This radio bears the intelligent lighting function which back-

light would automatic be turned on for 3 seconds during

tuning or any key to be pressed.

Press & hold the numeric key " ", then symbol " "

being displayed and means this intelligent lighting function

is off. By pressing & hold the numeric key " " again,

symbol " " is displayed and means the intelligent lighting

function is on now.

Special note: After shutting off the intelligent lighting

function, the [LIGHT/SNOOZE] key is still workable for

turning on or off the backlight.

Turning on / off the charging function

Press & hold [ ] key , symbol of " " & " " to

be shown and means rechargeable batteries to be used for

starting the charging. Press & hold [ ] key, symbol of

" " & " " to be lost on screen and means

alkaline batteries to be used and charging function to be off.

Special note: This radio is default to use alkaline batteries

for supplying power. In case of using rechargeable batteries,

you should switch radio to the status of rechargeable

batteries being used. The correct power capacity of

rechargeable batteries would be shown.

Timer

SLEEP

Frequency

changing

Auto-scan with pre-listening

flashing

Short press [POWER] button to turn on your radio, and

select your band by short press on [FM]、[MW/LW]、SW

[ ] or [ ] button. In case of receiving FM/ SW, telescopic

antenna should be pulled out as long as possible. Now, turn

in your favorite station with one of the following methods:

Method 1: Manual tuning

Rotate the [TUNING] knob to select your station.

Method 2: Auto scan stations

1. Short press [SCAN MODE] button with a "BB" sound.

2. Long press [SCAN MODE] button with a "B" sound to

activate the Auto-scanning function.

Auto search will stop on each

available station for 3 seconds

before it goes on searching for

the next available station.

3. To stop auto search function,

simply press any button, except

[M] button.

Note: When the radio search & stop to a station, just press

[M] button once to store it.

turning step

www.tecsunradio.com hch@cantonmade.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tecsun PL310 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info