31
GB
• It is only now that you can lift and remove the bowl from the motor unit.
3 : Mixing/chopping/kneading
ACCESSORIES USED:
• Bowl assembly
(b).
• Drive pin
(c).
• Multi-purpose blade
(d).
FITTING THE ACCESSORIES:
• Fit the bowl
(b3) onto the motor unit (a) and lock it in place.
• Slide the multi-purpose blade
(d) onto the drive pin (c), and position this assembly on the motor unit drive
(a1).
• Place the ingredients in the bowl.
• Fit the lid (b2) and lock it onto the bowl
(b3).
• To remove the bowl-lid assembly: release the lid then release the bowl.
KNEADING/MIXING:
• Turn the speed selector
(a3) to position 2 to start.
You can knead up to:
- 1 kg of heavy pastry, such as: white bread dough, short crust pastry, etc. in 60 seconds.
- 800 g of special bread dough such as: rye bread, wholemeal bread, multi-grain bread, etc. in 60 seconds.
You can mix up to:
- 1.2 kg of light mixture, such as: biscuits, sponge cake, etc. in 1 min 30 to approximately 3 minutes.
You can also mix up to 1 litre of pancake or waffle batter etc. in 1 min to 1 min 30.
CHOPPING:
• Turn the speed selector
(a3) to position 2 to start, or for better chopping control, choose the pulse position.
You can mince up to 600 g of food such as:
. raw or cooked meat (boned, gristle removed and cut into cubes).
. raw and cooked fish (without skin or bones).
. hard foods: cheese, dried fruits, certain vegetables (carrots, celery, etc.).
. soft foods: certain vegetables (onions, spinach…).
BLENDING:
• Turn the speed selector
(a3) to position 2 to start.
You can mix up to 1 litre of broth, soup or stewed fruit in 45 seconds.
4 : Grating/slicing
ACCESSORIES USED:
• Bowl assembly
(b).
• Drive pin
(c).
• Appropriate insert
(f) (depending on model).
• Insert support
(g).
FITTING THE ACCESSORIES:
• Fit the bowl
(b3) onto the motor unit (a) and lock it in place.
• Fit the chosen insert
(f) into the insert support (g), push the drive pin (c) as far as
possible through the insert
(f), and lock the assembly, then fit it onto motor unit drive
(a1).
• Fit the lid
(b2) and lock it onto the bowl (b3).
• To remove the bowl-lid assembly: release the lid, then release the bowl.
Ensure that the
metal drive pin (c)
is inserted into
the centre of the
lid (b2).
