519065
21
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
21
Setting the Time of Day
To set the Time of day for normal LCD time display.:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “TIME SETUP”. Press and release the OK key.
e. The “ZEIT?” screen is displayed showing current format (12 or 24 hour) flashing and current
time. Use the Up/Down keys to set the format (12Hr or 24Hr) then press and release the
OK key.
f. The “hours” will be flashing. Use the Up/Down keys to set the hours then press and release
the OK key.
g. The “minutes” will be flashing. Use the Up/Down keys to set the minutes then press and
release the OK key.
i. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Setting the Date
To set the Month, Date and Day:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “DATE SETUP”. Press and release the OK key.
e. The “JAHR?” screen is displayed with the last 2 year digits flashing. Use the Up/Down keys to
set the Year then press and release the OK key.
f. The “MONAT?” screen is displayed with the Month digits flashing. Use the Up/Down keys to
set the Month then press and release the OK key.
g. The “DATUM?” screen is displayed with the Date digits flashing. Use the Up/Down keys to set
the Date then press and release the OK key.
h. The “TAG?” screen is displayed with the Day flashing. Use the Up/Down keys to set the Day
then press and release the OK key.
i. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Setting the Backlighting On time
Used for setting the backlight delay following a key action.
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “BELEUCHT.SETUP”. Press and release the OK key.
e. The “BEL. ZEIT SEK.” screen is displayed with the current Backlight On time digits flashing.
Use the Up/Down keys to set the Backlight On time in increments of 5 seconds up to a
maximum of 60 seconds. The default Backlight On time is 10 seconds. To turn the Back-
lighting feature off, set the time to “00” (zero). Press and release the OK key.
f. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Reset the LCD Remote to Factory Defaults
To reset the LCD remote back to factory default settings. All User programmed parameters e.g.
code settings, learned commands, etc., are cleared to their respective default settings.
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “GERAETE RESET”. Press and release the OK key.
e. “BESTAET.RESET” is displayed. Press and release the OK key.
f. “WARTEN…” will be displayed while all parameters are Reset then the remote will exit Setup
and return to normal operation.
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:33 Seite 21
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Telefunken TRC 850 - 8in1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 Bedienungsanleitung - Englisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info