Bedienungsanleitung Teltonika RUT900 (Seite 85 von 156) (Englisch)

681330

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

7.8 Load Balancing

Load balancing lets users divide traffic between different interfaces.

2 Remote monitoring and administration

RUT9XX supports multiple monitoring and administration possibilities. One can get routers information through

SMS or using RMS (Remote Management System). Furthermore, some system related parameters can be obtained using

MODBUSD or MQTT publisher services. How to use them are described in the 9.19 and 9.20 chapters respectively. The

main focus is on parameters, which change from time to time, like signal strength, operators name (it is quite common

to change of operator name in countries where inner roaming is used) or module temperature. Although it is also

possible to read more static values, like MAC address, router’s serial number and many others. The access to the

mentioned parameters is implemented in both MODBUSD and MQTT publisher applications. Apart from getting of

some parameters, MODBUSD also supports setting of some system related parameter, for example, change value of

digital output. Although it sounds frustrating, this functionality is sometimes useful and necessary.

Some applications, like MQTT publisher or RMS allows monitoring or administrating several routers from one

place. It is very useful functionality, when you have few routers and would like to change some parameter using single

application. RMS share some similarities with SSH (Secure Shell) and indeed, one of RMS feature is to allows SSH access

to remote router. There is no separate chapter about RMS in this manual, because the interface of RMS is very intuitive

and user friendly. You can access RMS by using your browser with supplied username and a password at

http://rms.teltonika.lt

By sending SMS to the router the user can execute some command, like reboot, switch wifi on or off and many

others. With each SMS the user need to specify router’s administrator password. This is done for authentication

purposes. The list of commands that may be executed through the SMS is limited. Full list of commands can be found on

Services-SMS Utilities of routers WEB page. More about router’s management using SMS can found in chapter 9.8.

Another interesting router monitoring solution is SNMP (Simple Network Management Protocol). By not going

into deep details about this protocol, it is another manner to monitor router parameters. It allows the user to check

current operator, modem model and other router parameters. Compared to other applications and services, only SNMP

have ability to inform the user about the occurrence of specific event (called trap) in the system. The main drawback of

this protocol is, that it does not allow to change anything. You can read more about SNMP in chapter 8.9.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teltonika RUT900 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info