5
GETTING STARTED
STANDBY CONTROL
To turn the system on
Press the • STANDBY button.
The display will brighten and the system will switch on, set to
play the last function used. If this was radio, the last station
played will be selected.
To turn the system o
Press the • STANDBY button.
The unit will set to Standby, the Standby indicator will light and
the display light will dim.
NOTE: The Standby button is recommended for day to day
operation. If the unit is to be left unattended for a long period
(for example, holidays), disconnect the unit from the mains
supply.
Auto Standby
The unit will set to Standby automatically if standing idle for
15 minutes. This is an energy saving feature.
DAB/FM RADIO AERIAL
Before using your unit for DAB or FM reception, unwrap
and fully extend the aerial wire. You may need to adjust the
position of the aerial wire for maximum signal strength.
CONNECTING POWER
Before connecting the power, check that the mains voltage on
the rating plate on the back panel is the same as the voltage
in your area.
Plug the mains plug into the wall socket and switch the •
mains power on.
When power is connected to the unit, the display will light.
ADJUSTING THE VOLUME
To increase the volume
Press the • VOLUME+ button.
To decrease the volume
Press the • VOLUME- button.
Volume control display
The volume level is displayed when the volume is adjusted on
a scale MIN to MAX.
To increase the volume from the front panel
Turn and • hold the VOLUME control knob clockwise.
To decrease the volume from the front panel
Turn and • hold the VOLUME control knob anti-clockwise.
Mute
Press • MUTE to mute the sound.
The sound will be muted.
Press • MUTE again to restore the previous volume setting.
FRONT PANEL CONTROLS
The instructions in this handbook always refer to remote
control button functions.
In addition, some controls are duplicated on the front panel for
convenient operation when close to the unit.
EQUALISATION
You can change the equalisation of the sound to suit your
taste.
To select an EQ response
Press the • EQ button repeatedly to step through the EQ
options shown below.
