7
MORE DETAIL OF THE DAB SETTINGS MENU
Full Scan: Select Full Scan to re-scan the entire DAB
band and refresh the station list.
Manual Tuning: Manual tuning enables you to search
the band manually by turning the SCROLL control to
step through the multiplex numbers and check if any
have usable signal strength on a bargraph display.
Manual tuning is not necessary in normal operation
where scanning will have established a station list of
usable stations.
Prune: If your station list includes stations that you can
no longer receive (you may have moved to a dierent
area), you can select the ‘Prune’ option to remove them
and clean up the Station List.
System>Sleep: You can choose this option to set a
Sleep time via the menu.
System>Time: Select the time option to set the clock
manually. This may be useful if you are in an area where
it is not possible to receive DAB radio broadcasts.
You can also choose automatic clock setting options to
update from a DAB station, FM station or any station.
System>Language: Select this option to change the
language for the display legends. This option will not
change the language of DLS or RDS broadcast data.
NOTE: Only change the language setting to a language
you can speak. Once the language has been changed
you may have diculty nding the menu option to
change it back.
System>Factory reset: Select the ‘Yes’ sub-option to
reset all the settings of your radio to factory original
settings. The station list will also be cleared and any
stored preset memories will be erased. After a factory
reset the radio will re-scan the band and renew the
station list.
System>SW Version: This option will display the
version number of the control software currently
installed in your radio. This will be helpful to a technician
who is servicing the radio.
DAB SETTINGS MENU
Your radio has some additional features and options that
may be reached through the Settings Menu.
A complete map of the menu is shown on the next
page.
To enter the DAB Settings Menu
Set to DAB mode.•
Press and • hold the MENU/INFO button.
The menu will be displayed.
Turn the• SCROLL control to step through the
available options.
To choose an option from the menu, press the •
SELECT button.
Choose the ‘System’ menu option to open the sub-menu of
system options shown on the menu map.
