Bedienungsanleitung Tesco SM16 (Seite 7 von 8) (Englisch)

770539

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Switch o and unplug the cleaner before lling with water.

Attach the desired accessory (see previous page)1.

Remove the water 2.

tank and ll with

water. Do not

overll.

Replace the tank.3.

Connect the clean-4.

er to the mains

and switch on the

cleaner. When the

Red light comes on

the cleaner is ready

for use.

Hold the cleaner 5.

rmly and depress

the steam switch to release steam. Support the cleaner with both

hands as necessary.

In use the hose and any attached adaptor can reach a temperature

of 60°C. As this may be uncomfortably warm if you are supporting the

hose or adaptor, consider using a pad or glove (not supplied) to protect

your hand.

Note: The tube which transfers water from the water tank to the steam

boiler is weighted with a metal ball to maximise ecient delivery

of water from the tank to the boiler. During use the ball may rattle

around. This is intentional and not a cause for concern.

Notes on using the accessory tools:

Before you begin test the cleaner on a concealed area to deter-•

mine if it is suitable for treatment.

Only use enough steam to accomplish the task. The steam will •

last longer and the surface cleaned will get less hot.

When using the accessories on a vertical surface work from the •

top down. This will avoid streaks.

When you switch the cleaner on or if you change the angle of the •

cleaner during operation water drops may spatter from the nozzle.

When the cleaner is facing upwards the ow of steam may be less.•

Be aware of the power cord!• Do not allow it to entangle in furni-

ture or other objects and keep it clear of your hands and body.

With the exception of the Cone Adaptor, the other accessory tools •

t two ways round. You may nd this useful to reach awkward areas.

Be aware of the hose! • You may need to support it when you use it.

Switch o and let the cleaner cool down fully before emptying the

water tank or detaching/attaching accessories.

SOME SUGGESTED USES OF THE ADAPTOR TOOLS

Cone Adaptor: Use with other tools or by itself for cleaning grouting,

double glazing joints or other restricted areas.

Squeegee. Glass, mirrors and window panes for smear free cleaning.

Bonnet: Place over the squeegee to clean chair and sofa fabrics and

other small cloth covered items.

Large and Small Plastic Brush: Use on stubborn stains or grime.

Grout brush: Cleaning grouting

Wire Brush: For cleaning oven surfaces, oven racks, helping loosen

burnt on food residue from stainless steel (but not non-stick) pans.

Angled Nozzle: For hard to clean areas, around pipe work, taps etc.

Scraper: Ideal for removing dried-on food, loosening chewing gum

deposits and for removing food debris from freezers.

Page 7

Operating the Accessories

After Use

Unplug the power cord from the electrical outlet and let the unit

and all accessories cool down completely before handling.

Empty the Water Tank

Remove the water tank1.

Open the tank cap, invert the tank unit over a sink and pour all 2.

the water away. Replace the tank cap.

Now replace the water tank in the cleaner3.

Empty the Solution Tank (if used)

Hold the tank as shown and lift it from the Floor Head.4.

Unscrew the solution tank cap, invert the tank unit over a sink 5.

and pour all the water away. Replace the tank cap. Now replace

the solution tank in the Floor Head

Remove the carpet glider (if used).6.

Remove the pad from the oor head. Hold the oor head face up 7.

and then carefully peel o the cleaning pad.

You may nd this easier if you remove the oor head rst.

Now follow the instructions for washing the cleaning pad. 8.

After Using the Accessories:

Remove the accessory. 9.

It is easier to store the hose with the hose adaptor and the cone 10.

adaptor attached.

Re-attach the oor head and the carpet glider. It is easier to store 11.

the steam cleaner upright on the oor head.

Cleaning, Maintenance and Storage

Switch the cleaner o and unplug from the mains.

Empty the water tank and the solution tank.

Assemble the cleaner and coil the power cord round the cleats.

Remove the cleaning pad (and the bonnet if used) and either hand

wash and rinse well or machine wash with mild detergent at a

maximum water temperature of 40°C. Allow the pad to dry naturally

before replacing it. Do not dry in a tumble dryer or in an area of excess

heat.

Wipe the appliance body, the carpet glider and accessories with a

damp cloth and dry. Do NOT allow liquids to penetrate the appliance.

This could be dangerous.

Store the appliance upright out of the reach of children and pets.

Place the accessories in a bag or store them separately.

Where storage space is limited, you can store the cleaner with the

stem disassembled from the main unit.

A xing bracket is provided for secure attachment of the cleaner.

Instructions are on the next page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tesco SM16 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info