Bedienungsanleitung Texas GTU26S (Seite 10 von 17) (Deutsch, Englisch, Dänisch, Französisch)

636724

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Start and stop

How to start a cold engine

1. Place the brush cutter on a flat stabile surface.

2. Set the switch to ( I ). See il.. 6A

3. Press 8-10 times on the fuel pump under the air filter,

see ill. 6B.

4. Set the choke lever to start position, see ill.7

5. Pull the start cord out slowly from engine until resistance

is felt. Then pull strongly in start cord. Always feed the

start cord back into the engine by hand. Repeat up to 3

times until initial ignition is heard.

6. Set the choke lever to drive position, see ill. 8

7. Pull the start cord (according to point 5) until the engine

runs.

How to start a warm engine

1. Set the choke lever to drive position, see ill. 8

2. Pull the start cord until the engine runs.

How to stop the engine

1. Release the throttle button.

2. Set the switch to ( O ) position, see ill. 6A

Vibrations may travel up into the handle during

use. We therefore recommend taking a break

every 2 hours.

Operating the machine

Remove all foreign objects from the work area before

using the machine. Stones, glass, branches and similar

items may damage the machine. Also check the bolts

are tightened.

Start the motor as per the instructions below. Stand

clear of the machine’s moving parts.

Never attempt to move the machine in any way other

than intended for normal use while the motor is running.

Work from left towards right, see ill. 9.

Cleaning

The machine should be cleaned after use. Use a garden

hose to wash off soil and dirt. Remove the trimmer head from

the trimmer axel to remove wedged grass etc. from the rotor

shaft. The chassis number should only be cleaned with a

damp cloth to avoid unnecessary wear. Avoid using a high-

pressure washer during cleaning.

Storage

• If the machine is likely to be stored unused for

prolonged periods, follow the instructions below.

This will ensure longer machine lifetime.

• Use a garden hose to wash off soil, grass and dirt.

Remove any grass, etc. from the shaft. The chassis

number should only be cleaned with a damp cloth to

avoid unnecessary wear. Avoid using a high-

pressure washer during cleaning.

• Wipe the machine with a damp cloth so that all

surfaces are clean. Wipe the surfaces down with an

oily cloth to prevent rust.

• Always store the machine in a dry, clean location.

Troubleshooting

The motor will not start

1. Check the fuel control is set correctly.

2. Check the spark plug.

3. Check there is fresh gas in the tank.

The motor is not running smoothly

1. Check there is fresh gas in the tank.

The trimmer will not rotate

1. Check the cables are in good working order and

fitted correctly.

2. Check and remove wedged grass.

Noise, vibration and precautionary measures

1. Long-term exposure to noise levels exceeding 85 dB

(A) are damaging. Always use ear defenders when

the machine is being used.

2. Reduce the running speed of the motor to reduce

vibration and noise levels.

3. To reduce noise levels further, only use the machine

in an open environment.

4. Vibrations can be reduced further by holding the

handle firmly.

5. Always wear close-fitting work clothes, hard-wearing

work gloves, ear defenders and non-slip boots with

steel toecaps.

6. Take a 30-minute break every 2 working hours.

Specification

TYPE GTU26S

Connections Flexible drive

shaft without

clutch

Handle D-handle

Weight w/o fuel (kg) 5.5

Engine size (cc) 26

Output (KW) 0,7

Spark plug (item #) Denso

W22MPR-U

(10011022)

Carburetor Membrane type

Start Recoil

Fuel Lead free 95

octane gasoline

mixed with 2

stroke oil.

Tank capacity (L) 0,6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Texas GTU26S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info