4.3 INSTALLATION OF METALCOLOR CASING
To install the METALCOLOR casing proceed as follows:
1) Use pliers to remove all 6 pre-drilled fasteners indicated with the letter (A).
2) Pull the tabs indicated with the letter (B) outwards, in order to secure the side panel firmly in place.
3) Insert the side panel and fit the 4 fasteners in the corresponding slots. If it is not sufficiently fastened to the appliance, remove
it and pull out even further the tabs indicated with the letter (B). Next proceed to install the opposite side panel.
4) Remove the profile (F), after undoing the three screws (G), and insert the lower panel (E).
5) Then return the previously removed profile (F) to its place.
6) Adjust the upper and lower pin (D) and the lower and upper tabs (C) to firmly secure the panel to the appliance.
