4.5 INSTALLATION OF STONE CASING
To install the STONE casing proceed as follows:
1) Pull the tabs indicated with the letter (B) outwards, in order to secure the side panel firmly in place.
2) Insert the lower side panel as indicated in the figure. If it is not sufficiently fastened to the appliance, remove it and pull out
even further the tabs indicated with the letter (B). Next proceed to install the opposite lower side panel.
3) Insert the upper side panel as indicated in the figure. If it is not sufficiently fastened to the appliance, remove it and pull out
even further the tabs indicated with the letter (B). Next proceed to install the opposite upper side panel.
4) Seal the upper half-moon shaped elements with high temperature silicone taking care to position them correctly, as indicated
in the figure.
5) Remove the profile (F), after undoing the three screws (G), and insert the lower panel (E).
6) Then return the previously removed profile (F) to its place.
7) Adjust the upper and lower pin (D) and the lower and upper tabs (C) to firmly secure the panel to the appliance.
