- 17 -
Auto Answer
You can take a call without pressing the Talk key by just picking up the handset from charge
cradle if the Auto Answer set to ON by following procedure
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [AUTO ANSWER] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
Call Barring
You can set four numbers for call barring. The phone numbers which start with these numbers
cannot be dialed out. This function is to prevent children or house attendant dial pay calls.
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [BARRING] and press <OK>.
(4) Enter PIN code （0000）and press <OK>.
(5) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
(6) Use the <▲> or <▼> button to select from NUMBER 1 to 4.
(7) After input maximum 4 digits barring numbers and press <OK>.
Date Time Setting
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(2) Use the <▲> or <▼> button to scroll to [DATE & TIME] and press <OK>.
(3) Use the <▲> or <▼> button to set the Year and press <OK>.
(4) Use the <▲> or <▼> button to set the Month and press <OK>.
(5) Use the <▲> or <▼> button to set the Date and press <OK>.
(6) Use the <▲> or <▼> button to set the Hours and press <OK>.
(7) Use the <▲> or <▼> button to set the Minute and press <OK>.
Adjusting LCD Contrast
You can adjust the LCD contrast by following operation:
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [CONTRAST] and press <OK>.
(4) Use the <▲> or <▼> button to adjust 8 levels of LCD contrast.
(5) Press <OK> to confirm setting.
Manual Selection
If you set the handset to manual selection, the handset will only choose the base unit you have
set.
Press <MENU> button.
(1) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>
(2) Use the <▲> or <▼> button to scroll to [SELECT BASE] and press <OK>
(3) Use the <▲> or <▼> button to select to [AUTO] or [BASE #].
(4) Select one of the base number to link with and press <OK>
(5) If you set a base number not yet registered before, it gives an error tone and asking for select
another base number.
