- 18 -
Note:
a. If there is a “ + “ appeared to the right side base number, it means the handset has
already been registered to this base.
b. When you have activated automatic base selection and the handset is out of range from
the current base, the handset will only search for the strong base with strongest signal in standby
(not during communication).
c. Before you can select a base unit, the handset must be subscribed to the base first.
Restoring the Default Handset Setting
The handset can store its default setting if you do the following:
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [HS DEFAULT] and press <OK>.
(4) Enter the PIN code and press <OK>
Register handset
You can subscribe 5 handsets to 1 base unit. By default, each handset is subscribed as handset
1 on the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
The handset subscription has been removed from the base unit
You want to subscribe a different handset to this base unit.
If your base unit has the PAGE button option:
Press and hold the <PAGE> button on base for 10 seconds.
The base unit will be in registration mode for 3 minutes.
If your base unit does not has the PAGE button option:
Cut off the base power and connect again, then the base will be in registration mode for 3
minute.
Please do the following to subscribe the handset:
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [REGISTRATION] and press <OK>.
(3) Use the <▲> or <▼> button to select the number of the base unit (from 1 to 4) you would like
to subscribe the handset to and press <OK>.
(4) Enter the base PIN code (0000) and press <OK>.
(5) The unit will start searching for the base.
(6) When the handset is registered, it will show [HS] followed by the handset number.
