Bedienungsanleitung Thomson ROC Z907 (Seite 5 von 50) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

699754

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Note –USB port

Mobile devices, such as smartphones or tablets, can

be charged via the USB port only during operation in

the cigarette lighter socket.

5. Introduction

The ROCZ907 is aradio-based, teachable handheld

transmitter for controlling door operators of all brands;

therefore, you can substitute it for an existing handheld

transmitter (remote control), as well as use it to teach

and control several door operators from different

markets. Forretrotting systems with xed or rolling code

in the 433 MHz and 868 MHz frequency bands, voltage

supply is via the cigarette lighter socket. Thanks to the

integrated high-performance capacitor,the ROCZ907 can

also be operated outside the cigarette lighter socket for

up to three days. The integrated USB port allows charg-

ing of asmartphone or tablet during acar journey.

6. Main functional features

•Universally usable for various garage door and outside

door operators

•Power storage without batteries

•For mobile applications outside the car electrical

system (capacitor performance technology)

•Upto150 button clicks (for example, opening/closing

doors) possible when fully charged

•Recharge within 3minutes

•Power storage (standby): up to 3days

•Upto4buttons arecustom programmable (door

operators of all brands) via manual search

•Range: up to 40 metres (depending on buildings and

other local conditions, or on the performance of the

reception antenna)

•Resonant button behaviour on pressing (click and feel)

for secureuse in the vehicle

•Integrated 2.1 AUSB port for charging asmartphone

or tablet

7. Getting started

The ROCZ907 has an integrated high-performance ca-

pacitor.Itmust be charged via the cigarette lighter socket

(charging time: 3minutes) before rst-time use. Before

you can use your new ROCZ907 handheld transmitter,you

must rst register/teach it or synchronise it with the motor

control system of the door operator.Herethereare several

possibilities, which aredescribed in the next sections.

Note

•Some garage door operators requiretwo buttons in

order to program opening and closing. In this case,

two buttons must also be copied/programmed on

the ROCZ907.

•With some garage door operators, it can be nec-

essary to carry out synchronisation up to 20 times

beforethe code is recognised.

7.1 Determining the code system (compatibility)

The ROCZ907 covers about 90% of the door control

systems currently on the market. The following code

systems aresupported: xed code, rolling code (also

called ‘hopping code’) and complex rolling code.

Forinformation on the code system used by your original

handheld transmitter,please refer to the instructions for

your door operator,orcontact the manufacturer.

7.2 Copy function – xed code and rolling code

•Beforeperforming the copy function, make surethat

the original handheld transmitter and the ROCZ907

arefacing each other and not morethan 3cmapart.

•Press and hold the ‘1’ button on the ROCZ907 and

keep it held while pressing the ‘2’ button four times.

Release both buttons. The redfunction LED (1) now

ashes about every 2seconds.

•Onthe original handheld transmitter,press and hold

the button you arecopying until the redfunction LED

of the ROCZ907 ashes quickly (= conrmation that the

remote control signal has been successfully accepted).

•Now press the button you wish to program (for

example, ‘1’) on the ROCZ907. After successful

programming, the function LED (1) lights up redfor

about 1second and then goes out.

•Programming has been successfully completed.

•Then check whether the door can be controlled using

the button that has been taught to; if not, repeat

the procedure. If this still does not work after your

renewed attempt, it may be necessary,for your model,

to synchronise/register the ROCZ907 with the receiver

of the door operator system (see below).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson ROC Z907 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info