Bedienungsanleitung Thomson ROC8507 (Seite 6 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

607824

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Programming the remote control

Setting up the codes

Method A - Programming by scrolling

Used to enter the codes using the list of codes shown

on the display.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF

CODES.

4. Press OK once to display SELECT A MODE KEY.

5. Press once on the key of the device to be

controlled (TV, DVD, VCR, etc.) to display SELECT

DEVICE TV?

6. Using the navigation keys (5,6), select the device

(DVD, VCR, etc.) then con rm using OK. (for the TV

mode key, only TV may be selected). The  rst brand

name and the  rst code are displayed (e.g.: ADMIRAL,

0000).

7. Select the brand using the navigation keys 56,

or by selecting the 1st letter of the brand of your

device using keys 2 - 9 (as on a mobile phone: 2=abc,

3=def, etc.) (e.g.: THOMSON : 8 4).

8. Point the remote control at the device and try out

various keys, for example VOL +/-, PROG +/-, etc.

9. If the device responds, store the code using OK.

10. If the device does not respond, change the code using

the 43 keys and try controlling the device again.

11. If you have tried all of the codes for your brand

and the device still does not respond, try Method C

(programming by code search).

Method B - Programming by entering the code

Codes from the separate list (code tables).

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display ENTER

THE CODES then con rm using OK in order to display

SELECT A MODE KEY.

5. Press once on the key of the device to be controlled

(TV, DVD, V CR, etc.). The key selected and the code

stored in memory for this key are shown on the

display (e.g.: TV.....0166).

6. Enter one of the 4-digit codes o ered on the list

received separately.

7. The display brie y indicates SUCCESS before exiting

the programming mode.

Method C - Programming by code search

Used to manually search for a code in any code library

for a family of devices whose code or commercial brand

may not be included in the separate list or is  led in

another fashion.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display SEARCH

FOR THE CODES then con rm using OK in order to

display SELECT A MODE KEY.

5. Press once on the key of the device to be

controlled (TV, DVD, VCR, etc.) to display SELECT

DEVICE TV?

6. Con rm using OK to display TO SEARCH PRESS …P+

or Ђ (for the TV mode key, only TV can be selected).

7. Point the remote control at the device to be

controlled and try to turn it o using the Ђ key.

8. If the device to be controlled goes o , press OK to

store the code.

9. If the device does not go o , press the Ђ again

several times until the device goes o . Between

two presses on the key, leave time for the device to

respond (1-2 seconds).

10. As soon as the device to be controlled goes o , press

OK to store the code.

11. The display brie y indicates SUCCESS before exiting

the programming mode.

Note 1: Each time the (Ђ) key is pressed, the remote control

sends a signal to the device. This signal corresponds to

a code in the code library stored in the remote control

memory. If you go past the required code, use the PROG -

key to go back (or advance using PROG +) inside the code

library.

Note 2: the indication SEARCHING FOR: remains on display

during this mode.

Method D

Programming by search for Brand names

Used to manually search for a brand name (Thomson,

Philips, Sony, etc.) in the code library, which generally

contains 30 to 40 codes.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display USE

BRAND CODES then con rm using OK in order to

display SELECT A MODE KEY.

5. Press once on the key of the device to be

controlled (TV, DVD, VCR, etc.) to display SELECT

DEVICE TV?

6. Con rm using OK in order to display ENTER THE

BRAND KEY 1-8 (for the TV mode key, only TV can be

selected).

7. Refer to the separate list of codes by brand (this list

comes separately) and key in the number (1 to 8)

that corresponds to the brand of the device to be

controlled. TO SEARCH PRESS P+ OR Ђ is displayed

on the screen.

8. Point the remote control at the device to be

controlled and try to turn it o by pressing the Ђ key

once.

9. If the device to be controlled goes o , press OK to

store the code.

10. If the device does not go o , press the Ђ again several

times until the device goes o . Between two presses

on the key, leave time for the device to respond (1-2

seconds).

11. As soon as the device to be controlled turns o , press

OK to store the code.

12. The display brie y indicates SUCCESS before exiting

the programming mode.

Note 1: Each time the (Ђ) key is pressed, the remote control

sends a signal to the device. This signal corresponds to

a code in the code library stored in the remote control

memory. If you go past the required code, use the PROG -

key to go back (or advance using PROG +) inside the code

library.

Note 2: The indication SEARCHING FOR remains on display

during this mode.

Testing the remote control

before programming

1. Turn on the device that you wish to control.

2. Press the key that corresponds to the type of device

to be controlled:

TV: TV set,

DVD: DVD player/recorder,

VCR: video cassette recorder,

STB: satellite, cable, ADSL,

DVBT: DTT adaptor,

AMP: ampli er

AUDIO: Hi-Fi system,

AUX: device of your choice (e.g., second TV set

or DVD player, etc.),

3. Point the remote control at the device to be

controlled and try to turn it o using the Ђ key. If

the device does not go o , you should program the

remote control following one of the procedures A, B,

C or D described below.

Identifying a code: Press and hold a mode key. The

code stored in memory for this mode is displayed (e.g.,

DVD…..0768).

Note: Except for the TV key, every mode key (DVD, VCR,

etc.) can be programmed to control a device other than

the one indicated on the key. It is thus possible to assign,

for example, the DVD mode to the VCR key. You should

enter the code that corresponds to the desired brand and

device following one of the procedures indicated in this

manual.

Thomson ROC8507 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info