Bedienungsanleitung Thomson THS813 (Seite 10 von 30) (Englisch)

658794

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

P10

STARTING UP FOR THE FIRST TIME

3.3 Connecting to multiple xed antennas

Fig. 8.

A: Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using a good quality

coaxial cable and suitable ‘F-connectors’.

B: Connect the output or “to receiver” of the DiSEqC 1.0 switch to the SAT IN connector on your receiver using a

good quality coaxial cable and suitable ‘F-connectors’.

C: Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.

3.4 Connecting to your motorised dish via DiSEqC 1.2

Fig. 9

Another possibility to watch programmes from multiple satellites is by mounting a dish to a motorized DiSEqC

1.2 or GOTO-X positioner. For the correct setup and mounting of your motorised dish we recommend referring

to the advice of a professional satellite equipment installer to ensure correct alignment and function. Please

ensure that all connections are fitting well and are correctly assembled, then you only need to connect the

“OUT” connector of your positioner to the SAT IN connector on the rear side of your receiver.

3.5 Connecting and using the IR extender

Fig. 7

With the IR extender you can place the receiver out of sight (e.g. a closed cabinet) while still being able to

control it. Plug the IR extender into the IR connector on the back of the receiver. Locate the extender at a

position allowing direct sight to the remote control. Once a suitable location is found, remove the protection

foil from the adhesive tape on the bottom of the extender and fix it by slightly pressing it down on the surface it

should be placed on.

NOTE: We recommend considering the standard adhesive notes (dust-free, fat free, not to coarse materials,

etc.)!

4.0 STARTING UP FOR THE FIRST TIME

Ensure that your satellite signal is of good quality and that all connections are properly setup. In case you

encounter difficulties or you have questions, please ask your local dealer for assistance. It is recommended to

follow the First Time Installation step by step. It will guide you through the basic setup and installation process.

You will enjoy digital HD broadcasts within just a few minutes. If your receiver is not already powered ON,

against our expectation, please use the power switch on the rear side of your receiver to switch it ON. In the

unusual/uncommon case that the receiver should not start-up within the First Time Installation, please reset

the receiver with the factory reset. See chapter 7.1.5 of the user manual on our website: www.thomsonstb.net/

downloads/manuals/THS813_UM_EN.pdf. Please insert your valid and activated Irdeto smart card for proper

reception of the channel bouquet of your choice. For correct insertion of the smart card please see the insertion

drawing.

4.1 Language, Country and Video Settings

After connecting your receiver for the first time, the OSD language, Country and Video Setting menus will be

shown. First choose your language with tu then use pq to select your preferred country. For these settings

you can also use OK to show a list of available settings. Then use pq to select Video Setting. In the Video

Settings you can press tu to choose connection between HDMI and Scart. If necessary, these settings can be

opened by pressing OK. A detailed description of the settings can be found in the chapters 7.1.3.1 HDMI or

7.1.3.2 SCART of the user manual on our website: www.thomsonstb.net/downloads/manuals/THS813_UM_

EN.pdf

NOTE: If you select an HDMI resolution which your TV does not support, the receiver will switch to the

previous setting automatically after ~10 sec. When you see the displayed message, please confirm

the selected resolution by pressing OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS813 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info