Bedienungsanleitung Thomson THS813 (Seite 15 von 30) (Englisch)

658794

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

7. MAIN MENU

P15

6.10 Playback of recording

If you have made recordings you can access the HDD Manager directly from viewing mode by pressing u.

Select the recorded event with pq and start the playback in full sceen mode with OK. Alternatively you can

press u to start playback in preview mode. Further options are displayed in the HDD Manager. For a detailed

description of the menu please refer to chapter 7.4.4 HDD Manager of the user manual on our website: .

www.thomsonstb.net/downloads/manuals/THS813_UM_EN.pdf

WARNING: For encrypted channels broadcasting rights may be limited by the seller, which is why some

channels are restricted during playback to fast forward/rewind, or possibly limited in another way.

When the Maturity Rating is activated for a certain programme, you must enter the corresponding

PIN code MATURITY RATING MASTER PIN: 0000 to be able to record this programme.

NOTE: The default maturity rating master PIN can be changed by the operator.

7.0 7. MAIN MENU

Press MENU in viewing mode to display the Main Menu. All important settings and features of your receiver can

be operated from the Main Menu. It consists of the following sub-menus: Installation, Update & Info, Conditional

Access, Channel Manager and Timer.

Use tu to select a sub-menu and pq to choose an option. Press OK to advance to the chosen submenu.

7.1 Installation

This menu allows you to change satellite settings and to search for channels. Further you can adjust important

settings for your receiver. It consists of the following sub-menus: Antenna Setup, Channel Search, System Settings,

Parental Lock and Factory Reset. Choose a sub menu with pq and press OK to advance.

7.1.1 Antenna Setup

Use this menu to change or add settings for an already installed or new satellite and to configure its parameters.

Type configures which kind of DiSEqC you are using, use tu to change. In case your setup differs from the

default setting DiSEqC 1.0 you can adjust DiSEqC OFF by pressing t or DiSEqC 1.2 and GOTO-X by pressing u.

If you use DiSEqC OFF you will only be able to setup one satellite. Press q and then OK to open the settings for

this connection.

For usage with DiSEqC 1.0 you can setup up to 4 satellite positions.

If you use DiSEqC 1.2 or GOTO-X, you can install satellites which are received by your motor dish. For setup and

installation as well as for correct setup of the positions in the receiver we highly recommend taking the advice

of a professional dish installer and experienced dealer or technical personnel.

7.1.1.1 Edit LNB

Satellite Press OK to open the list of available satellites and chose the preferred satellite with

pq or P+/P and confirm by pressing OK.

LNB Type Choose LNB Type with tu if you are not using a universal LNB.

LNB Low Freq. This shows the value for the appropriate LNB Type used and you can only adjust for

“Normal” LNB.

LNB High Freq. This shows the value for the appropriate LNB Type used and you can only adjust for

“Normal” LNB.

22KHz Tone This setting for AUTO should not be changed, only if is necessary for your LNB type.

LNB Power Here you can change the LNB power with tu if necessary.

Transponder Press OK to open the list of available transponders for the chosen satellite, in order to

check your reception or align the antenna.

Press the RED button SAT Edit to rename the chosen satellite and press the GREEN button Add TP to add a new

transponder to this satellites database.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS813 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info