Bedienungsanleitung Thomson THS813 (Seite 16 von 30) (Englisch)

658794

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

P16

7. MAIN MENU

7.1.1.2 DiSEqC 1.2 set-up

Use this menu to configure the motor position for each satellite which you want to receive. If you have already

configured satellites, use tu in the PAGE (1/8-8/8) selection which will help you navigating easier through the

32 available positions. Select a position number and press OK to open its setup.

Satellite Press OK to open the list of available satellites and choose a satellite with pq or P+/P

and confirm by pressing OK.

Transponder Press OK to open the list of available transponders if you need to adjust a transponder

for the above selected satellite.

Movement Speed: Here you can change the motor speed Slow/Quick.

Move: Press tu to move the dish to East or West. Carefully move it until you can observe

that both signal bars receive acceptable reception levels. When you have found the

selected satellite press

and select Yes to save the position.

Centre Position: Press OK to move the motor to the centre position of 0 degrees. This is only needed for

the first time to adjust the dish correctly.

Set Limit: Press OK to open this submenu in order to adjust mechanical limits for your dish. This

is only necessary if your dish is damaged due to touching a wall or similar mechanical

margins.

7.1.1.3 GOTO X set-up

Use this menu to configure the motor position through the GOTO-X function. If you have already configured

satellites, use tu in the PAGE (1/8-8/8) selection which will help you navigating easier through the 32 available

positions. Select a position number and press OK to open its setup.

Satellite Press OK to open the list of available satellites and choose a satellite with pq or P+/P

and confirm by pressing OK.

Transponder Press OK to open the list of available transponders if you need to adjust a transponder

for the above selected satellite.

Your longitude: Use the 0 ~ 9 buttons to enter the value of your longitude. Press OK to confirm the

value.

Your latitude: Use the 0 ~ 9 buttons to enter the value of your latitude. Press OK to confirm the value.

GOTO: Press OK to move the motor to the wanted position according to your local

parameters. Press

and select Yes to save this position.

Center Position: Press OK to move the motor to the centre position of 0 degrees. This is only needed for

the first time to adjust the dish correctly.

NOTE: Detailed information about correct values for your location can be found on websites like

dishpointer.com, itouchmap.com or other reliable sources.

7.1.1.4 SAT Edit

This submenu allows renaming of the chosen satellite or creating a new satellite position. Use pq to choose

Satellite or Position.

Satellite: Press OK to open the keyboard and enter a new name with the 0 ~ 9 buttons (max. 9

signs). When you have entered the preferred name, press pq to choose OK in order

to rename or choose Cancel to discard.

Position: Use 0 ~ 9 to enter the orbital position. If necessary, you can use OK and pq to change

the hemisphere from E to W or vice versa.

By pressing the pq buttons you can select OK to change or Cancel to discard.

7.1.1.5 New TP

This submenu allows adding one or more transponders to the database of the selected satellite. This enables

you to check the signal or adjust the antenna for this satellite. Further you can perform a NIT Search on the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS813 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info