Bedienungsanleitung Thomson THS815 (Seite 10 von 29) (Englisch)

658790

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

WARNING: The batteries should not be recharged, disassembled, electrically short-

circuited, be mixed or used with other types of batteries. If rechargeable

accumulators instead of batteries are going to be used, we recommend

using (e.g. NiMH) types with low self-discharge to ensure long time

operation of remote control.

2.7 Using the remote control

Obr. 5

To use the remote control, point it towards the front of the digital receiver. The remote control has a

range of up to5 metres from the receiver, if properly aligned towards the IR eye on the front panel.

NOTE: The remote control will not operate if its path is blocked or affected by

bright/stroboscopic light.

3.0 CONNECTIONS

3.1 Basic connection via HDMI or SCART

Obr. 6.

a) Connect the LNB or Monoblock for ASTRA 19.2 /ASTRA 23.5 of your satellite antenna to the

SAT IN connector of your receiver using a good quality coax cable and suitable ‘F-connector’

plugs.

b) Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and

the other end to the HDMI input of your TV set.

c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.

Optional: If your TV set doesn’t have an HDMI connector you can use the SCART connection instead.

In such case connect one end of a good quality SCART cable to the TV SCART of your receiver and

the other end to the SCART input of your TV set.

3.2 Connecting to multiple xed antennas

Obr. 7.

a) Connect the LNBs of your xed antenna to the desired inputs of a DiSEqC 1.0 switch using a

good quality coaxial cable and suitable ‘F-connectors’.

b) Connect the output or “to receiver” output of the DiSEqC 1.0 switch to the SAT IN connector

on your receiver using a good quality coaxial cable and suitable ‘F-connectors’.

c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.

3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X

Obr. 8

Another possibility for watching programmes from multiple satellites is by mounting a dish to a

motorized DiSEqC 1.2 or GOTO-X positioner. For the correct setup and mounting of your motorised

dish we recommend referring to the advice of a professional satellite equipment installer to ensure

correct alignment and function. Please ensure that all connections are tting well and are correctly

assembled, then you only need to connect the “OUT” connector of your positioner to the SAT IN

connector on the rear side of your receiver.

3.4 Extended connections for your home entertainment

Obr. 9

a) Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver

and the other end to the coaxial audio input of your home theatre set, amplier or any other

device supporting digital audio.

b) Connect your USB 2.0 storage device to this connector by using a good quality USB cable or

insert the device directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS815 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info