Bedienungsanleitung Thomson THS815 (Seite 11 von 29) (Englisch)

658790

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

4.0 STARTING UP FOR THE FIRST TIME

Ensure that your satellite signal is of good quality and that all connections are properly setup. In case

you encounter difculties or you have questions, please ask your local dealer for assistance.

It is recommended to follow the First Time Installation step by step. It will guide you through the

basic setup and installation process. You will enjoy digital HD broadcasts within just a few minutes.

In the unusual/uncommon case that the receiver should not start-up within the First Time

Installation, please reset the receiver with the factory reset DEFAULT PIN: 0000).

Please insert your valid and activated Irdeto smartcard for proper reception of the channel bouquet of

your choice.

4.1 Language (Step 1)

After connecting your receiver for the rst time, the Welcome 1st Step: Language menu will be

shown on screen. First, choose your preferred language by using pq. After selecting, conrm by

pressing OK to go to Step 2.

4.2 Audio and Subtitle Setup (Step 2)

In this next step Welcome 2nd Step: A/V Output Settings menu you can choose your preferred audio

language and TV screen settings. If you are satised with the default settings just proceed by pressing

OK at the selection Next.

Aspect Ratio Select the TV screen you are using. The options are 16:9 and 4:3.

Aspect Conversion

Select conversion for the TV screen if needed. The options are Pan&Scan, Letterbox,

Pillar or Full screen.

First Audio Language

Select the main audio track language which you prefer to hear as rst choice. Either

press OK for a list with all available languages or use t u to select a language.

Second Audio Language

Select the second audio track language which you prefer to hear if the rst choice

not is available.

Subtitle Language

Subtitles support. Select the preferred language. If not needed, keep this selection

O.

When all settings have been made, proceed with the selection Next and press OK to go to Step 3.

4.3 Time (Step 3)

In the next step Welcome 3rd Step: Time menu you can change the time zone and select if you

would like to use one hour extra during summertime. To change settings, use pq to select GMT

Oset and select with t u your time zone with t u. With the option Summer Time you can set

On for one extra hour during this time of the year. If the time is correct in the default settings or

corrections have been made, proceed with the selection Next and press OK.

4.4 Channel List Selection (Step 4)

In Welcome 4th Step: Service Searching menu you can decide which of the Fast Scan channel lists

you want to install. Use pq to highlight your selection in blue. Press OK to choose a list and the

receiver will go to Step 5.

NOTE: The Fast Scan channel lists are maintained and updated automatically

by the service list provider and can’t be edited. Editing of channels

can only be performed for channels which are saved above channel

number4000 or additionally saved in favourite list(s). If you want to change

to another list, you need to do a Factory Reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS815 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info