Bedienungsanleitung Thomson THS815 (Seite 15 von 29) (Englisch)

658790

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

NOTE: Timeshift only works correctly when a fast USB storage device such as

a USB 2.0 HDD is connected to the receiver. Distorted picture and/or

audio during Timeshift indicates a too low USB device speed. In the case

of Timeshift being activated at channels with a high data rate (HD), we

cannot guarantee an accurate playback of the Timeshift le.

WARNING: The broadcasting rights of encrypted channels may be limited by the

provider and fast forward/rewind may not be possible or the Timeshift

function may be limited.

6.10 Playback of recording

If you have made recordings, you can nd these in menu Storage and select Media player. Press OK

to open the media player and make sure the selection is DVR by using the t u buttons. The root of

USB is shown as disk_0 and press OK to open the record list.

Select the recorded event with pq and start the playback in PIG screen mode with OK. Press again

OK to start playback in full screen modes. During this playback you can press to call the playback

screen banner. Here you can select options to step, to rewind or jump forward and to read details of

event and time.

WARNING: For encrypted channels broadcasting rights may be limited by the

provider, which is why some channels are restricted during playback

to fast forward/rewind, or possibly limited in another way. When the

Maturity Rating is activated for a certain programme, you must enter the

corresponding PIN code Maturity Rating master PIN: 0000 to be able to

record this programme.

NOTE: The default maturity rating master PIN can be changed by the operator.

7.0 MAIN MENU

Press MENU in viewing mode to display the menu. All important settings and features of your

receiver can be operated from this menu. It consists of the following sub-menus: Installation,

Channel, Settings, Storage and Tools.

Use t u to select a sub-menu and pq to choose an option. Press OK to advance to the chosen

submenu.

7.1 Installation

This menu allows you to change satellite settings and to search for channels. Furthermore, you can

adjust important settings for your receiver. It consists of the following sub-menus: Installation Guide,

Dish Settings, Motor Settings, Channel Search, Manual Search and FST/FNT Search. Choose a sub

menu with pq and press OK to advance.

7.1.1 Installation Guide

Use this menu to follow the rst installation wizard again as you did the rst time to install the receiver.

It will guide you through the Welcome 1st Step: Language to the last Step6 to search for channels.

7.1.2 Dish Settings

Use this menu to change or add settings for an already installed or a new satellite and to congure its

parameters. Here you can congure which type of DiSEqC you are using, use t u to change. In case

your setup differs from the default setting, you can adjust DiSEqC to any port you would like. If you

use DiSEqC OFF you will only be able to setup one satellite. For usage with DiSEqC 1.0 you can setup

up to4 satellite positions. If you use DiSEqC 1.1 you can setup up to 16 satellites positions.

Satellite Press OK to open the list of available satellites and chose the preferred satellite with

pq or P+/P- and conrm by pressing OK.

LNB Power Change the LNB power with t u if necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS815 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info