Bedienungsanleitung Thomson THS815 (Seite 17 von 29) (Englisch)

658790

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

English

Transponder list

Select a specic transponder you would like to search on. By pressing t u you can

change between the transponders referring to the selected satellite, you can also

press OK to list and select with pq or P+/P-. Afterwards press OK to choose. Press

RED to Edit TP, with BLUE you can Delete TP and with GREEN you can enter data

for a new transponder Add TP. Details of the transponder are shown on screen.

Scan Mode Here you can decide which type of channels you want to scan for: Either scan

all channels ALL, for Free-To Air only FTA or use Scramble to scan for scrambled

channels only.

Channel Type TV & Radio will scan for TV and radio channels, TV for TV channels only and Radio

for radio channels only.

Search Type Select if you would like to search all or only one satellite, Manual search only on one

Transponder or on a Network.

Scanning all the selected satellites is only available if more than one satellite has been setup.

When all settings have been made, press OK at the preferred scan method to start the scan process

or to quit without scanning. All new found channels will be stored at the end of the channel list.

NOTE: NIT (Network Identication Table): This option will scan for the NIT table of

the satellite and allows you to receive new appeared channels.

NOTE: When you want to add technical data for a new transponder we

recommend verifying it by consulting websites like: www.lyngsat.com or

www.kingofsat.net or you can refer to professional publications.

7.1.5 Manual Search

This submenu allows to search on a specic transponder and to enter values for it. You can also create

new satellites with corresponding transponder data base.

Satellite Select the satellite to which you would like to add a new transponder. If you select

NewSat then you can start to create a new satellite.

Transponder By pressing t u you can change between the transponders referring to the selected

satellite. Select TP new to enter in the next step new transponder values.

Frequency: Enter a frequency with the 0 ~ 9 buttons.

Symbol rate: Enter the required symbol rate with the 0 ~ 9 buttons.

Polarization: The polarization can be changed with t u.

Search One TP Press OK to start to search only this transponder.

7.1.6 FST/FNT Search

The submenu allows you to search again manually for the broadcaster’s (FST) channel list. This option

you can use to search when new channels are broadcasting but not installed yet. Simply select this

option and press OK to start.

7.2 Channels and Timer Manager

Select a menu item you’d like to manage TV Manager, Radio Manager,Delete all and Timer

Manager. Use pq to highlight the submenu of choice and press OK to select.

7.2.1 TV Manager

The menu allows you to create Favourite lists, Move channels in order, Lock channels with PIN

protection and Delete channels from the TV list.

7.2.1.1 Adding channels to favourite lists

Channels from the Channel List can be added to up to8 different favourite groups. Press the red

button Fav and select the wanted FAV group and press 2 x times u. Use pq to select a channel you

wish to add to a favourite group. When the highlight is on the channel of your choice, press OK. In

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS815 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info