Bedienungsanleitung Thomson THT700 (Seite 16 von 22) (Englisch)

658773

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

P12

MAIN MENU

Wizard again! When you delete channels, all system settings made earlier such as language preferences,

output settings, parental control settings will remain.

6.2 System Setup

6.2.1 Language Setting

In this menu you can set your language of choice for menus, audio and subtitles.

Menu Language: Set according to your preferences.

Audio Language: Digital TV allows transmission of more than one audio track/language. If a

channel has multiple audio tracks/languages, the receiver will select the audio

track/language automatically according to your selection.

Subtitle Language: Digital TV allows transmission of more than one subtitle language. Select the

preferable subtitle language and the receiver will automatically show subtitles in

the selected language (availability depends on the operator). If you do not want

to display subtitles, adjust the setting to Off. Please consider that events may

contain “built in” subtitles which can’t be disabled.

6.2.2 Output Setting

In this menu you can set the output parameters of the receiver according to the connected TV set and for

the connected audio amplifier if applicable.

TV Mode: Mostly PAL is used in Austria. In some cases it might be required to use another

standard.

Screen Mode: Adjust this setting in accordance with the aspect ratio of your TV set (4:3 or 16:9)

and the preferred conversion.

If a TV with 4:3 aspect ratio is connected the best mode is 4:3 LB. 4:3 will not

be converted and video in 16:9 will be converted to display it fully and without

geometrical distortion (black horizontal lines on the top and bottom of the

screen).

If a TV with 16:9 aspect ratio is connected the best mode is 16:9 PB. 4:3 will be

displayed without geometrical conversions (black vertical lines on the left and on

the right and bottom of the screen) and video in 16:9 will be displayed without

conversion and fill the whole screen.

Try the settings and find the variant which suits you best. Do not forget about the

possibility to manage the format from the menu of your TV (depends on your TV

model).

HDMI Resolution: Allows you to change the resolution of the HDMI output. If the connected TV

does not support the set resolution you will see a black screen. In this case, wait

for 10-15 seconds without pressing any buttons on the remote control of the

receiver and the previous value will be recovered automatically.

Audio on HDMI: Keep the factory default setting. Change only after consultation of our support /

service/ hotline.

Audio on S/PDIF: Keep the factory default setting. Change only after consultation of our support /

service/ hotline.

6.2.3 OSD Settings

In this menu you can adjust the transparency level of menus and set the banner time-out.

6.2.4 Time Settings

In this menu you can specify the synchronising method for date and time, manually set date and time and

set the duration for displaying the information banner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THT700 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson THT700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info