Bedienungsanleitung Timex 05S096000 Ironman Transit plus M05S (Seite 7 von 9) (Englisch, Französisch, Spanisch)

806058

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

All activity data will be cleared to zero at 12am each day.

TIME MODE:

Press button C (Mode) until the display shows "TIME". The watch will enter the time display view with Hours,

Minutes, Seconds, Weekday, Month, Date and Day.

In Time mode,

1. Press and hold button A (Set/Indiglo) to activate the Setting mode. Hour

digits will start to flash.

2. Press button B (Start/Stop/+) or D (Reset/Lap/-) to change the setting

digits. You can select the next setting by pressing button C (Mode) once.

The sequence of setting is Hour, Minute, Second, Year, Month, Date, 12-

24 Hour, Contrast, Units, Gender, Age, Height, Weight.

3. Press B (Start/Stop/+) to increase the setting digits and D (Reset/Lap/-)

to decrease the setting digits.

4. Press and hold button A (Set/Indiglo) to exit the setting mode.

WORKOUT MODE:

1. Press button C (Mode) until the display shows "WORKOUT". The watch will

enter the workout display view with chrono time (Workout time) on the top line

and Dist (Distance) at the lower row.

2. Press button B (Start/Stop/+) to start measurement for the exercise. The

message "START" will display at the upper row for 2 seconds.

3. Press B (Start/Stop/+) again to stop the measurement. The message "STOP"

will be displayed for 2 seconds on the upper row. Use button B (Start/Stop/+)

for the run and stop operation.

• Press button D (Reset/Lap/-) to select the view for other data such as

Speed (Spd), PACE, STEP, Calorie (CAL), Clock (CLK) and Distance

(dIST).

4. Press and hold button D (Reset/Lap/-) to reset the timer and clear all data and

ready for next new measurement.

Workout Setting Mode

1. When workout is stopped, press and hold button A (Set/Indiglo) to enter the

Workout Setting mode. The heart rate training level will start to flash.

2. Press button B (Start/Stop/+) or D (Reset/Lap/-) to select level 1, 2 or 3. There are three levels (1,2,3)

for heart rate zone default setting to select. Be sure you entered your “Age” in the Time setting section

as this will be used as reference for your Max. HR.

To manually adjust the Heart Rate Zone High and Low to your desired settings, proceed to step 3/4.

Heart Rate Zone Level

Default Setting

60% of Max. HR to 70% of Max. HR

70% of Max. HR to 80% of Max. HR

80% of Max. HR to 90% of Max HR

3. Press button C (Mode) to select next setting field. The setting sequence is Heart Rate Training Level,

Heart Rate Zone High (Hr-Hi), Heart Rate Zone Low (Hr-LO), INZONE Alarm on/off, Target steps.

4. Press button B (Start/Stop/+) to increase setting digits and D (Reset/Lap/-) to decrease the setting

digits. Press and hold button for fast setting.

Setting Group

Adjustment

Hr-HI

Enter the upper heart rate threshold. If your heart rate goes above

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Timex 05S096000 Ironman Transit plus M05S Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info